I found a nice way to be able to move the heavier logs with my little 2210. Most of the time, I'll use the forks, but for the larger logs, I found I can move them using a bar through the tie tube (or whatever it's called) in the loader. This is actually the first time I've moved a log using this approach, so this isn't really that big of a log. A few collars help to keep the bar and the log tongs in place.
(https://forestryforum.com/gallery/albums/userpics/44045/Log_Haul1.jpg?easyrotate_cache=1651663308)
(https://forestryforum.com/gallery/albums/userpics/44045/Log_Haul2.jpg?easyrotate_cache=1651663309)
Good idea! Shedding the forks or grapple will increase your load plus moving the weight closer to the tractor will help. If you tie a string on those hooks you can release without getting off the tractor. Sometimes I can get them loose by just raising and lowering them until they don't catch.
I'll have to remember this and maybe try it when the need arises. Good job.
Definitely a good idea. Unfortunately, I do not have quick attach yet.
Just don't overdo it, keep the rear end on the ground! The front axle can get overloaded. I saw a Madindra in the shop with a cracked front axle housing. Ouch....
I use that method with y 45 horse Kubota. I cut a chain to size to go through the tube and use 2 separate chains to hook to the log. I probably gain another 500-600 lbs. of safe lifting capacity that way. I think it's more stable too because it's closer to the front of the tractor.
That looks like a good method.
Picked up way too many very heavy logs with my Kubota.
A good number I had to use 4wd to back up even with loaded rear tires and a 700 lb winch on the back.
My front tires are showing a lot of cracks in the rubber.
Wont replace until one or both blow.
Just don't get it swinging too much and test your grill guard, they rarely win