The Forestry Forum
General Forestry => Sawmills and Milling => Topic started by: dail_h on April 28, 2005, 08:53:26 PM
Moving the mill&edger tommorow,first off-site sawing job. Guy is in the mulch /pallet buisness.Dismantel old pallets,and makes a different size out of the parts . He's short on stringers,so all I'll be cutting will be 2x4s for now.
He's furnishing a lift to feed the mill,and move lumber and slabs plus a mexican to ofbear. $200/m,I'M GONNA BE RICH :D :D 8)
:D :D dont know about the rich parts but i sure bet you'll have fun and can rack up a lot of bf cutting 2x stock. congrats
good luck, but ahhhhhhhhhhhhhh it sounds so familiar..................pallett part, Imagonnagetrich!!!!!!!!!!!!!!!!!