Text only | Text with Images

The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: Jim B on February 20, 2023, 09:15:48 PM

Title: Saw Blade Doctor
Post by: Jim B on February 20, 2023, 09:15:48 PM
Does anybody have a suggestion on a saw doctor in the New England area? I need to have my saw tensioned for the right rpm. I have been putting it off but I have to run blade to 600 rpm to get it to stand up. It cuts fine but leans on the guides too much for my liking  its a 48" Belsaw
Title: Re: Saw Blade Doctor
Post by: Plankton on February 21, 2023, 10:14:20 AM
What part of new england? The saw shop llc from northumberland nh comes highly reccomened.  Great guys up there.
Title: Re: Saw Blade Doctor
Post by: terrifictimbersllc on February 21, 2023, 10:25:45 AM
Sharp Tool Co Harvard MA knows a lot about saws. I would give them a call. 
Title: Re: Saw Blade Doctor
Post by: moodnacreek on February 21, 2023, 12:33:50 PM
I keep hearing good thinks about Charlie at the Saw Shop in N.H.  Sounds like he picked up the pieces after the Bruce Dexter era.           Myself, I use Bruce Moore, Gansvort, N.Y.
Title: Re: Saw Blade Doctor
Post by: Jim B on February 21, 2023, 05:43:26 PM
I'm in Massachusetts , ill check these guys out  thanks for the replies
Title: Re: Saw Blade Doctor
Post by: wink on February 21, 2023, 06:33:16 PM
U S blades ,Hamden Maine do mine and I have no complaints 
Title: Re: Saw Blade Doctor
Post by: Osterman.r on February 21, 2023, 07:43:55 PM
I have heard from more than one person about a saw shop in Ashland NH. But have heard nothing more than that. Have any of you heard about this place?
Text only | Text with Images