The Forestry Forum
General Forestry => Chainsaws => Topic started by: Medicdon on September 24, 2024, 01:29:34 PM
In need of a 28. Inch 1/2 pitch bar for mcculloch g70
Holy mackrel looking for a needle in a hay stack .I had to look that saw up must be rare as a hens tooth .If I were to guess it might be a 10 series Mcculloch hard nose bar .Problem would be the driver size .Most had .063 ,some had .058 .If the bar studs are 5/16" I'd say 10 series .If they are 3/8" would be large reed valve size like a 250,SP 125 etc .I'm not certain if I have the IPL on that saw or not but if I do I'll report back what if anything I've found .
Who could tell you most likely would be Mark H in Dike Iowa who has a chainsaw musium .He has forgotten more about McCulloch than I've ever known .