The Forestry Forum
General Forestry => Forestry and Logging => Topic started by: Jsblair8 on April 13, 2025, 10:35:50 AM
Cleaning the gearmatic 19 winch on my Timberjack 404. I've removed primary brake band and both clutch bands. I can't get the anchor pin out to remove the secondary brake band. Its really stuck. Any suggestions as to how to get the pin out?
Much appreciated.
That pin should have a threaded hole in the end of it so you can install a slide hammer to it and knock it out. Also you can thread a bolt into it and use a impact gun to start it turning in the bore.