The Forestry Forum

General Forestry => Forestry and Logging => Topic started by: catvet on November 23, 2005, 09:55:00 PM

Title: Gas Mixture Uses
Post by: catvet on November 23, 2005, 09:55:00 PM
So I bought, and mixed, too much gas for my stihl saw.  Does anyone know if this mixture could be used in other equipment (other than two cycle engines)?  It's a 1:50 mix.  I was wondering if I could add it my ATV or some other use before it goes stale.  I'm pretty much done with sawing for the winter.  I actually have most of next year's firewood supply cut and split.
Title: Re: Gas Mixture Uses
Post by: beenthere on November 23, 2005, 10:02:21 PM
Next years?  I'm working to get the following year after next year split. I prefer it to dry at least 2 years, and hopefully 3 under cover. But that is just my hang-up.  :)  I think I have more than enough or this year and next, but as long as I enjoy making it, and have pallets to stack the split wood onto, I'll keep cuttin and splittin.

How much 'extra' gas do you have? 
Title: Re: Gas Mixture Uses
Post by: Max sawdust on November 23, 2005, 10:23:48 PM
Hey beenthere,
You can come and split some of mine ;D  I have 100 cords in 100 inch lenght and still burning green wood this winter ::)
Since the main living level is only heated with wood the wife gets mad when she has to start a fire when I am gone :(  Too much birch bark required :o
No time for splitting with all that felling and milling that needs t
o be done.
Just kidding...I am with you on never having enough dry wood.
max
Catvet howmuch do you have premixed ???  No boat or snowmobile ???
Sounds like a good excuse to buy a boat or snomobile ;D  or some other cool two cycle toy.
Title: Re: Gas Mixture Uses
Post by: Dale Hatfield on November 23, 2005, 11:42:02 PM
I only have mixed gas here on the farm.  The push mower / garden tractor/ 4 wheeler weedeater chainsaws all  get it. My trucks  even got it  in some as needed cases.   I dont really think its an issue . Their is very little oil in a 50:1 mix ratio.  It not like dumping in gallons of oil into the tank.  I  would just call it top end lube and dump it into a gas sucking monster.
Dale
Title: Re: Gas Mixture Uses
Post by: David_c on November 23, 2005, 11:42:59 PM
If just a couple gallons dump it into car or truck. It won't hurt it. If more than a couple then do it a over next few tanks of fuel.
Title: Re: Gas Mixture Uses
Post by: mike_van on November 24, 2005, 06:51:43 AM
I wouldn't worry about 50/1 either - burn it in any engine -  now the old 16/1 you would want to spread out some -
Title: Re: Gas Mixture Uses
Post by: catvet on November 24, 2005, 08:58:11 AM
Thanks all.  We are only talking somewhere between 1 and 2 gal.  Thought I was doing more cutting than I did.