Text only | Text with Images

The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: Fla._Deadheader on April 12, 2006, 08:11:12 PM

Title: Mapp for Swing Blades
Post by: Fla._Deadheader on April 12, 2006, 08:11:12 PM

Is it hot enough to replace tips or do I need oxy-acetylene ???
Title: Re: Mapp for Swing Blades
Post by: twoodward15 on April 12, 2006, 08:25:21 PM
I obviously don't run a swing mill, but I can't see why it wouldn't be hot enough assuming you have the right mix.
Title: Re: Mapp for Swing Blades
Post by: Captain on April 12, 2006, 08:59:23 PM
All you need to do is melt silver.... :)
Title: Re: Mapp for Swing Blades
Post by: swinger on April 12, 2006, 09:11:58 PM
  mapp gas works fine just takes a little longer.
                                                 
Title: Re: Mapp for Swing Blades
Post by: Fla._Deadheader on April 12, 2006, 09:26:04 PM

Thanks, Y'all  8) :D :D
Text only | Text with Images