The Forestry Forum

General Forestry => Forestry and Logging => Topic started by: adirondack harvester on April 26, 2006, 07:41:38 PM

Title: NY Hard Maple Harvest
Post by: adirondack harvester on April 26, 2006, 07:41:38 PM
Here's some pictures from the Hard Maple logging I did this past week.  There wasn't much of it on the property so I had to travel all over just to get this small pile.  But with current prices it should be worth it.

Just cut to length.

(https://forestryforum.com/gallery/albums/userpics/13645/100_1374.JPG)

Finished pile.

(https://forestryforum.com/gallery/albums/userpics/13645/100_1381.JPG)
Title: Re: NY Hard Maple Harvest
Post by: beenthere on April 26, 2006, 08:25:01 PM
Noticing quite a few 'short' lengths trimmed off. Is that because of trucking?  Seems a waste of good lumber laying there in the log ends bucked off.  But expect there is more to the story.
Title: Re: NY Hard Maple Harvest
Post by: oakiemac on April 26, 2006, 08:38:02 PM
Some of those Maples look real nice with small hearts. I love a small hearted Maple ;D
Title: Re: NY Hard Maple Harvest
Post by: wiam on April 26, 2006, 09:11:38 PM
 beenthere,  on maple, trimming out defects can really raise the price of a log way more than the footage that you lose.

Will
Title: Re: NY Hard Maple Harvest
Post by: J.J on April 26, 2006, 09:18:27 PM
NICE JOB . WHERE ARE YOU CUTTING? AND SAVE THE TRIM PIECES YOU CAN SPLIT THEM UP AMD SELL FIREWOOD
Title: Re: NY Hard Maple Harvest
Post by: woodmills1 on April 26, 2006, 09:35:52 PM
Nice maple, nice job.  Yes, maple is about the only shining light right now.
Title: Re: NY Hard Maple Harvest
Post by: beenthere on April 26, 2006, 10:43:51 PM
wiam
I agree with that as a possibility, and I'm interested in why.  :)

As the blocks seem to be on the end of two bucked logs. 
Title: Re: NY Hard Maple Harvest
Post by: HORSELOGGER on April 27, 2006, 08:11:35 AM
Did  you cut any other species or just the maple?
Title: Re: NY Hard Maple Harvest
Post by: adirondack harvester on April 27, 2006, 11:34:39 AM
I was cutting these in northern NY.

Yes, there were a couple reasons for the trimming.  Some of the trees had some rot and I had to cut that out.  The other reason is for grading purposes.  I had to remove some butt ends to remove seams and other imperfections.  As my grandfather always told me "let the tree tell you what lengths to cut" so that is what I try to do.  It's really amazing the price difference for veneer vs. sawlog.  I was lucky to save most of the trees since most had severe crown damage and I only had one tree that was a loss.   But I use the word 'loss' loosely since the firewood prices are skyrocketing.   
Title: Re: NY Hard Maple Harvest
Post by: Ron Wenrich on April 27, 2006, 04:45:34 PM
Sounds like there was pretty bad logging damage from the last logging job.  Probably the reason for the rot and all the seams.
Title: Re: NY Hard Maple Harvest
Post by: woodmills1 on April 27, 2006, 07:21:41 PM
firewood is getting amazing I got more for the last load of firewood than I did for a load of low grade oak sawlogs.
Title: Re: NY Hard Maple Harvest
Post by: adirondack harvester on April 28, 2006, 07:39:04 AM
Actually the damage is from a severe ice storm we had back in '98, a lot of trees were lost in the area from that storm.  The property hasn't been logged for over 50 years.