The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: Kcwoodbutcher on July 10, 2006, 10:18:00 PM

Title: Timberking 1600 hydraulic fluid
Post by: Kcwoodbutcher on July 10, 2006, 10:18:00 PM
A while back I brought a Timberking 1600 in the middle of being rebuilt. I finished the rebuild and have been using it a while, but it needs a little hydraulic fluid. Does anyone know what specs Timberking recommends?
Title: Re: Timberking 1600 hydraulic fluid
Post by: Bibbyman on July 11, 2006, 03:38:12 AM
Welcome to the Forum..

I can't help you on the HD question but I bet someone here can.  If not,  give the guys at TimberKing a call.  I'm sure they'll be glad to hear from you.  Maybe they can get you a new manual for your mill.
Title: Re: Timberking 1600 hydraulic fluid
Post by: paparex2 on July 11, 2006, 03:34:58 PM
Anti-Wear Hydraulic Oils  ISO 46

ARCO DURO AW46
Chevron Hydraulic Oil AW46
EXXON Humble AW46
Lubriplate HO-1 Heavy Duty
Moble DTE 25
Quake State AW46

Just in case you need it

Hydraulic Filter
NAPA 1551
FRAM P1653A

All above from recomended list that came with my 1600

Hope it helps
Title: Re: Timberking 1600 hydraulic fluid
Post by: ScottAR on July 11, 2006, 05:36:54 PM
AW 46 works out to approx 15w hydro oil....  Wix filter would be a 51551
hth
Title: Re: Timberking 1600 hydraulic fluid
Post by: treecyclers on July 11, 2006, 07:56:15 PM
I didn't know I needed some until I saw this posting, and checked my tank!
Tanks, er, thanks!
SD
Title: Re: Timberking 1600 hydraulic fluid
Post by: Kcwoodbutcher on July 12, 2006, 02:24:30 AM
Thanks alot, got what I needed. This is a great place.