Print Page - ripping with 066

Title: ripping with 066
Post by: keef661 on June 20, 2003, 03:12:11 AM

can anyone help with recc for ripping chain for stihl 066
cutting medium hardwood ??? ???

keef

Title: Re: ripping with 066
Post by: Kevin on June 20, 2003, 03:41:42 PM

I use Oregons RA, works good for me.

Title: Re: ripping with 066
Post by: KiwiCharlie on June 20, 2003, 09:47:36 PM

G'day Keef,
Get in touch with Levin Sawmakers, Phone: 06-368 2494, or email at info@timbersaws.co.nz and talk to Chris. They have the Oregon RA rip chain by the loop, or roll. Good prices too. Thats what I use, and cant speak highly enough of it!
They will send a catalogue on request, and do heaps of good chainsaw stuff.
Hope this helps.
Cheers
Charlie.

Title: Re: ripping with 066
Post by: keef661 on June 21, 2003, 05:34:43 AM

thanks charlie,good to see the a.b's do some ripping on the boyo's 8) 8)

ripped some mac today with the carlton chain pretty good
had a few country stubbies to finish of a good day
cheers
keef ;D ;D

Title: Re: ripping with 066
Post by: keef661 on June 27, 2003, 03:52:47 AM

Charlie,thanks for the address for sawmakers
got catalogu e today cheers keef
stihl.com sent me a manual for my saw also which was
totally unexpected ;D
does anyone do portable saws or plans in kiwi land
can fabricate one & plans would be good
-3 in invers today going to split some mac on sat
got some big rings to split&rip ho, ho,ho
cheers

keef

Title: Re: ripping with 066
Post by: KiwiCharlie on June 28, 2003, 08:13:14 PM

G'day keef,
Try searching the Sawmill part of the forum. Im sure Ive seen threads on building your own mill over there.
Cheers
Charlie.

Title: Re: ripping with 066
Post by: Oregon_Rob on June 29, 2003, 10:13:16 AM

Keef,
I know you can get plans from Procut.com. At least I think thats the site. IF not, do a search on procut chainsaw mill. They have plans, but you have to buy them.

The Forestry Forum

General Forestry => Chainsaws => Topic started by: keef661 on June 20, 2003, 03:12:11 AM