Text only | Text with Images

The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: spencerhenry on May 05, 2009, 11:58:05 PM

Title: high altitude jets for woodmizer edger
Post by: spencerhenry on May 05, 2009, 11:58:05 PM
i have a wood mizer edger with the kohler 25hp v-twin. the lowest elevation i run at is 6200' but most of the time it is running at 8500'. it runs rich, which i have dealt with but right now i am edging some 2.5" x14" reclaimed doug-fir and need all the power i can get. anybody know part #'s or where to get jets, woodmizer doesnt have them.
Title: Re: high altitude jets for woodmizer edger
Post by: ladylake on May 06, 2009, 05:15:30 AM
  On my old Oliver I've soldered the hole and redrilled a little smaller being carefull not to get solder on the treads.   Steve
Title: Re: high altitude jets for woodmizer edger
Post by: bandmiller2 on May 06, 2009, 05:56:39 AM
Spence,the local Kohler dealer is the guy to see.Frank C.
Title: Re: high altitude jets for woodmizer edger
Post by: sparks on May 06, 2009, 12:03:45 PM
Spence......give Greg Brock a call here at Wood-Mizer. He may still have a high altitude kit or may be able to get one.
Title: Re: high altitude jets for woodmizer edger
Post by: KGNC on May 06, 2009, 04:10:36 PM
I saw the thread subject and thought you were working on a trade.  :D
Text only | Text with Images