Text only | Text with Images

The Forestry Forum

General Forestry => Forestry and Logging => Topic started by: aksawyer on July 12, 2009, 06:49:11 PM

Title: jd 640 tranny oil level check
Post by: aksawyer on July 12, 2009, 06:49:11 PM
I am looking at buying a John Deere 640 skidder and cannot find wwhere to check tranny oil level.Thanks for any info that you  all may have.
Title: Re: jd 640 tranny oil level check
Post by: 630 Tigercat on July 12, 2009, 07:12:04 PM
I think its a small door down by your feet when your sitting in the cab  if i remember correct
Title: Re: jd 640 tranny oil level check
Post by: Maineloggerkid on July 12, 2009, 07:27:17 PM
It depends on what model. Straight 640's and D models have the Hydrualic and tranny on the same stick. From the E models on up, the are behind a little door under the actual door on the right side. You will also find I believe 4 grease points as well.
Title: Re: jd 640 tranny oil level check
Post by: riggin rat on July 13, 2009, 11:07:08 PM
On a 640, sitting in the seat it would be on the right side, open up the engine panel and all the way up by what would be a firewall you will find a dipstick that is both hyd. and trans.
Text only | Text with Images