This my first post and a short introduction. I've been an owner/sawyer since January, 2002. I certainly am not an expert at anything, but I do have a little experience. I own a '98 WM SH which now has over 5K hours on the second engine. I only "travel" with the mill and generally cut only 2-3 days a week.
I've been "lurking" on here for many years, so thanks to you for the tips that I've learned from you... :D
I'll work on my DanG profile as I get the "hang" of this forum. (They all seem to be a little different.)
Welcome to the Forestry Forum!
Looking forward to hearing more about what you do with your mill.
Oh yeah, I was supposed to mention that we like pictures and it ain't really that hard to do on here...
Herb
welcome your in good company
Welcome to the Forum!
Did you put all them hours on the mill? That's a lot of couple days a week sawing!
Quote from: PC-Urban-Sawyer on August 04, 2009, 10:52:05 PM
Oh yeah, I was supposed to mention that we like pictures and it ain't really that hard to do on here...
I knew I would be "bumped" about pictures. ;D Picture posting is different on different forums. I'll figure this one out and post some. Thanks for the welcome.....
Quote from: Bibbyman on August 05, 2009, 03:31:42 AMDid you put all them hours on the mill? That's a lot of couple days a week sawing!
Yup, they are mine. I guess I should have said that I
try not to work but 2-3 days a week. I usually don't work Saturdays, but to meet customer's needs (like
this) one, I'm going to have to do it. Some of my jobs, like yesterday, are only 1/2 day. I'm now off for 2 days until Friday. I do not turn down
any jobs. If it is 300 BF, I cut it. After they see the product, next time, it will be larger. 75% of my customers are repeat. My largest single cut was 32,716 BF.
I've not had a "slowdown" of work during this "downturn"..... good ;D and bad :(
And, thanks for the welcome, Bibbyman.....and Mary.
Gday
and Welcome to the Forum Magicman ;D ;D 8) 8) and welcome in from the cold mate ;) :D ;D ;D Your knocking out the hours on your mill and its good to see you have a great repeat costomer base its nice to deal with the same ppl most of the time ;) ;D 8) and your already onto us with the pics mate ;) :D :D
Have A goodone
Reguards Chris
Welcome to the Forum.
Don
Thanks Don. I'm working on my picture posting skills. I just got one to post in RaginCajun's thread..... ;D
Glad to have you majicman. keep with the picture posting.
Thanks Eric, I've gotten a couple in there. I'll add more as I find them on disc.
Welcome Magicman, its nice to have another youngster on board.
Welcome to the forum neighbor.
Radar, I just finished working a week on rebuilding the Corinth Baptist Church in Magee that was blown away by a tornado.
I also passed through Collins after attending the Mississippi Forestry Ass'n meeting in Hattiesburg last week. Small world.
Ernie, We gots to stick together..... ;D