The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: Quebecnewf on May 11, 2011, 07:10:42 AM

Title: rafting logs
Post by: Quebecnewf on May 11, 2011, 07:10:42 AM
Start of a new thread to document my attempt to raft home to my mill the 400 logs I gathered up over the last 2 winters.

Distance to tow approx 11 miles. Speed I hope to make with logs in tow 2 knots.
Here is a Google pic of the planned route


(https://forestryforum.com/gallery/albums/userpics/12408/3489/raft_2.jpg)

As you can see some of the route is quite technical and requires working with the tides. Part of the area is dry at high tide so in order to get the logs you must go in with the tide put them in the water and come out on the same tide.

Quebecnewf
Title: Re: rafting logs
Post by: thecfarm on May 11, 2011, 07:18:20 AM
Hope you take more pictures for us. Sounds like you know what you are doing.
Title: Re: rafting logs
Post by: r.man on May 11, 2011, 07:36:37 AM
No roads in those parts Quebec or are you just feeling historical. Around here the log drives were always in the spring with the runoff pushing everything. Lots of small creeks, ponds and rivers still have stone piles and underwater timber leftovers from dams that held the water back to flood low areas to make the drive possible.
Title: Re: rafting logs
Post by: isawlogs on May 11, 2011, 07:54:32 AM

r.man,
No roads on shore over his way.  Travelling is done by boat or air when the ice is out.
Title: Re: rafting logs
Post by: LOGDOG on May 11, 2011, 09:03:36 AM
Looking forward to pictures of the trip.
Title: Re: rafting logs
Post by: Magicman on May 13, 2011, 09:30:46 AM
I'm glad that you took the time to detail the route.  It is not as I had visualized.
Title: Re: rafting logs
Post by: bandmiller2 on May 13, 2011, 08:50:51 PM
What are you planning to use for a tow boat?Is rafting still commonly done in your area? Frank C.
Title: Re: rafting logs
Post by: weisyboy on May 13, 2011, 10:47:46 PM
are the logs worth the time and effort, seams like a lot of trouble to go to for some logs.

but still very interesting, iv only ever seen logs rafted down a river with the current.
Title: Re: rafting logs
Post by: beenthere on May 14, 2011, 12:02:06 AM
weisy
Seems if he wants logs, he has to go to the trouble of getting them. Otherwise, he goes without logs and lumber.

So...I'd guess it is worth it to quebecnewf.
Title: Re: rafting logs
Post by: Ianab on May 14, 2011, 03:50:01 AM
Probably still cheaper than putting them on a truck and driving them 50 miles, especially if there is no road. ;)

Lash them together to make a raft, hook on a tow rope and start towing.
Title: Re: rafting logs
Post by: Piston on May 14, 2011, 04:47:38 AM
Trip sounds like it would be a lot of fun and an adventurous experience.  Looking forward to the pics, also interested in the tow boat.  ;D
Title: Re: rafting logs
Post by: SwampDonkey on May 14, 2011, 05:56:25 AM
Weisyboy, it's the only way to get logs to lumber up there unless you want to pay a fortune to boat the lumber up from the nearest town with a road into it. It's a very remote area. The Island is pretty much barren with shrub-like trees.
Title: Re: rafting logs
Post by: Quebecnewf on May 14, 2011, 06:26:21 PM
 

(https://forestryforum.com/gallery/albums/userpics/12408/2005_0508Image0006.JPG)
Here is the tow boat. It has a 120 horse JD diesel. 400 logs will be as much as I can tow I would think. I will work the tides. Logs will be in racks of 20 logs attached to a main line . We will come out with the falling tide which will bring us out of the bay at 3 or 4 knots. Coming across the bay will hope to get 2 knots. We will have to wait for good weather any wind and you will lose the tow. I know this because it has happened to me before.

Quebecnewf
Title: Re: rafting logs
Post by: PC-Urban-Sawyer on May 14, 2011, 07:42:47 PM
Quebecnewf,

My father-in-law (God rest his soul) would have said "L'rd Tund'rn Jezaz Bye, that's a wee bo't for such a grand haul..." And then he'd have taken another pull on the bottle of Screech.

Good Luck. Wishing you fair winds and following seas.

Be Careful!

Herb
Title: Re: rafting logs
Post by: logwalker on May 14, 2011, 11:13:03 PM
Didn't you used to sled those over the ice? How big is the prop on that boat?

Joe
Title: Re: rafting logs
Post by: Quebecnewf on May 15, 2011, 04:45:25 PM
We do haul logs on the ice but this year we were busy cutting my father's firewood and hauling that home. We did haul home around 100. Gas is 1.89 a liter here now so we will try to move them by boat. I can bring 400 logs home with the boat with about 10 gal of diesel. If things go as planned

The prop on the boat is about 20" 3 blade.

Quebecnewf
Title: Re: rafting logs
Post by: sgschwend on May 15, 2011, 11:27:50 PM
I would recommend setting up a small tow and going through the process with a tow you would consider easy. 

I haven't towed logs before but I have towed docks about 100' long.  They towed hard, I couldn't obtain 2 knots with 250 hp.  I think what you will find is that a big prop matters too, not just horse power. 

Should be fun.  Let us know how it goes.

Title: Re: rafting logs
Post by: Quebecnewf on May 16, 2011, 06:24:04 PM
I have towed around 380 logs from about the same location a few years ago with no problem. Slow but steady. I also towed 200 logs from agreater distance to the west and they were all big spruce also with no problem. The west tow also involved crossing the mouth of a river. Total distance towed about 17 miles total towing time about 7 hours. It was a flat calm day so that helped.

Quebecnewf
Title: Re: rafting logs
Post by: Mooseherder on May 16, 2011, 06:34:02 PM
Bring the video. :) ;)
Title: Re: rafting logs
Post by: Jeff on May 16, 2011, 08:59:51 PM
Yea, we need a new favorite video from you, but it'll be pretty hard to beat this one you posted awhile back.  ;)

http://www.youtube.com/watch?v=GGhfWrqLbEo&feature=player_embedded
Title: Re: rafting logs
Post by: customsawyer on May 16, 2011, 09:18:07 PM
I hope he drives boats better. ;D
Title: Re: rafting logs
Post by: Quebecnewf on May 16, 2011, 09:26:21 PM
Yes that was pretty wild. My good friend had an even closer call this winter. He took his camera back and set himself up and took apic of the final result. I will look for it and add it

Quebecnewf
Title: Re: rafting logs
Post by: Quebecnewf on May 16, 2011, 09:35:02 PM
 

(https://forestryforum.com/gallery/albums/userpics/12408/2686/wilson.JPG)

Here is the pic he took of the close call. He fell a birch ( the one across his back ) as it fell he saw it was going strike this broken fir and pendulum on him . He dove to the side the birch took him in the back and crushed him to the ground . If he had dove 6 inches further ahead you can see what would have happened. As it was he was just badly shaken up.

Quebecnewf
Title: Re: rafting logs
Post by: isawlogs on May 16, 2011, 10:21:20 PM
 And you call that a close call .  :o   Magigman has many close calls.  ;D
Title: Re: rafting logs
Post by: LOGDOG on May 16, 2011, 10:25:22 PM
Wow! That guy needs to stay away from Chainsaws and trees. They don't like him.
Title: Re: rafting logs
Post by: Mooseherder on May 16, 2011, 10:32:11 PM
Good thing that was a rotten Birch cause they don't hurt as much.
Is Red Green your friend? :D
Title: Re: rafting logs
Post by: SwampDonkey on May 17, 2011, 05:59:48 AM
Might need Relic and Nick on this job. ;)
Title: Re: rafting logs
Post by: isawlogs on May 17, 2011, 08:14:15 AM
 
Sure glad to hear that he made it, rename him Lucky

How long to you think it will take you to tow these logs to the island. ?
Can you have this done in one day , tying all the logs and tow them home ?
Title: Re: rafting logs
Post by: Ernie on May 17, 2011, 03:57:48 PM
I don't think it would be a good idea to let your friend "help" with the tow. ;)
Title: Re: rafting logs
Post by: Troublermaker on May 17, 2011, 05:25:43 PM
Quebecnewf do you tie your logs together with rope? Back when my Daddy was a boy {He was born in 1911} they use to drive a wedge in the end of the logs with a ring and a short piece of chain holding them to gather to make a circle then fill the inside with logs and float them down the river.
Title: Re: rafting logs
Post by: Quebecnewf on May 17, 2011, 05:42:15 PM
The logs are all hitched together 20 to a rack and the fastened to the main line. One rack behind the other. The front rack is about 3 logs wide the next one 6 logs wide then 12 then 20 . This gives a point to the front and makes them tow easier.

Nice weather here today got the boat painted, block and tackle hooked on and and will launch on the tide tomorrow.

Quebecnewf


Title: Re: rafting logs
Post by: Peter Drouin on May 18, 2011, 10:26:59 PM
thats a staged picture.  with the guy under the tree  :D :D :D nice one
Title: Re: rafting logs
Post by: Quebecnewf on May 22, 2011, 06:20:37 PM
 

(https://forestryforum.com/gallery/albums/userpics/12408/2686/DSCF4050.JPG)
Went down today to check on the logs we piled for tow last winter. There are two locations one on the mainland and one on a small island just ofshore. This is the ofshore pile . Not the best location as we found out today.

(https://forestryforum.com/gallery/albums/userpics/12408/2686/DSCF4054.JPG)

We have two piles on this island about 200 logs


(https://forestryforum.com/gallery/albums/userpics/12408/2686/DSCF4060.JPG)

These are the piles one the mainland about 200 there as well. This is a better location . They will be easier to get into the water.


(https://forestryforum.com/gallery/albums/userpics/12408/2686/DSCF4062.JPG)

Another view


(https://forestryforum.com/gallery/albums/userpics/12408/2686/DSCF4060.JPG)

Next Sat and Sun should be rafting day weather permitting

Quebecnewf
Title: Re: rafting logs
Post by: Kevin on May 23, 2011, 10:11:59 PM
Nice pictures Newf.
Title: Re: rafting logs
Post by: r.man on May 23, 2011, 10:27:13 PM
Q, how did you do the logging?
Title: Re: rafting logs
Post by: Coon on May 24, 2011, 01:31:35 AM
They hauled the logs out to shore with snowmobiles and komatik style sleighs in the winter.  Do a search on his previous threads that he started.  ;D
Title: Re: rafting logs
Post by: Quebecnewf on May 29, 2011, 09:59:31 PM
 

(https://forestryforum.com/gallery/albums/userpics/12408/3489/DSCF4070.JPG)

Went down today and got 200 logs ready to tow. Things went pretty well. We will try to tow them home to the mill tomorrow or the day after weather permitting.

Quebecnewf
Title: Re: rafting logs
Post by: beenthere on May 29, 2011, 10:37:09 PM
Wish you well and a safe voyage. Thanks for the pic.
Looks ominous and challenging. But I think you like a good challenge. :)
Title: Re: rafting logs
Post by: Magicman on May 29, 2011, 10:42:22 PM
That is what I was waiting to see.  I wish you safety with your tow.   smiley_thumbsup
Title: Re: rafting logs
Post by: Ernie on May 29, 2011, 10:58:19 PM
Looks like quite a challenge, thanks for the pic can't wait for the "action" shots

Good luck.
Title: Re: rafting logs
Post by: Coon on May 30, 2011, 12:18:42 AM
Looks like you're about ready to hook onto the floating skidder.  ;D  Nick and Relic would be proud of you.   :D
Title: Re: rafting logs
Post by: LOGDOG on May 30, 2011, 10:02:30 AM
Looking good.Nice logs and the best thing is they are getting a bath. Should be nice clean sawing.  :)
Title: Re: rafting logs
Post by: jim king on May 30, 2011, 10:44:53 AM
I can relate to what you are doing.
(https://forestryforum.com/gallery/albums/userpics/14293/1298/Maderas_y_animales_004_javari.jpg)

(https://forestryforum.com/gallery/albums/userpics/14293/1298/Maderas_y_animales_010_javari.jpg)

(https://forestryforum.com/gallery/albums/userpics/14293/1298/Javari_barge_100_4303.JPG)
Title: Re: rafting logs
Post by: LOGDOG on May 30, 2011, 11:14:52 AM
Wow, beautiful logs Jim. What species are those?
Title: Re: rafting logs
Post by: jim king on May 30, 2011, 11:26:10 AM
The biggest logs are Lupuna for rotary cut plywood veneer and the smaller ones are Mahogany and Spanish Cedar.  These photos are from the Javari River which is the border between Brazil and Peru.  No skidders are used , the logs are rolled or winched out and lashed together with staples made out or rebar and cable.  It probably took this group a month to get down to the mills at the Peru, Colombia and Brazil border.
Title: Re: rafting logs
Post by: LOGDOG on May 30, 2011, 03:05:12 PM
Jim,

   You don't happen to know anyone down there that exports Spanish Cedar, Ipe, and Mahogany do you? In the last 24 hours it's been a topic my wife and I have been discussing ...importing those species. I'd be interested in some contacts if you know of any.  :)
Title: Re: rafting logs
Post by: Quebecnewf on May 30, 2011, 04:50:58 PM
nOW THOSE ARE NICE LOGS. I only wish our rivers would support that type of log driving. No such luck here. River is too wild and far too many big waterfalls and rapids

Going tomorrow to tow the logs home to the mill. Will post more pics at the end of the week

Quebecnewf

Title: Re: rafting logs
Post by: kelLOGg on May 30, 2011, 05:03:25 PM
I have to jump in and show my ignorance. Does the picture show the logs in tow broadside??:o  I would expect to see them towed in the direction of their axis. Wouldn't there be a huge difference in the drag between the two towing orientations?
Bob
Title: Re: rafting logs
Post by: Mooseherder on May 30, 2011, 05:24:46 PM
This is the process he mentioned back on reply 30. ;)

Quote from: Quebecnewf on May 17, 2011, 05:42:15 PM
The logs are all hitched together 20 to a rack and the fastened to the main line. One rack behind the other. The front rack is about 3 logs wide the next one 6 logs wide then 12 then 20 . This gives a point to the front and makes them tow easier.
Quebecnewf
Title: Re: rafting logs
Post by: jim king on May 30, 2011, 07:36:58 PM
LOGDOG:
QuoteYou don't happen to know anyone down there that exports Spanish Cedar, Ipe, and Mahogany do you? In the last 24 hours it's been a topic my wife and I have been discussing ...importing those species. I'd be interested in some contacts if you know of any.

I would not at this time encourage anyone to import wood from any country in the Amazon into the US.  With the new laws there is not one peice of wood that could pass "Lacey Act" scrutiny and you could end up with a huge fine and possibly jail.  Mahogany is also under CITES which makes it doubly dangerous.  Here the bribes can be paid and false paperwork made to pretend the wood is legal but the US Govt is now starting to pay for inspections of logging concessions and private property to verify that the wood actually came from the stump shown on the harvest plan.

I would hold off for a year or so until the dust settles and some sanity returns.  Right now the lumber industry could save the Amazon and create jobs and a nondestructive future but the WWF and others have created this mess and have made it impossible for people to work legal and thus people are switching back to slash and burn and cocaine production.  This is a true case of the inmates running the asylum at this time.  Wood going to Mexico or China and most other places is not to dangerous but to the US is a time bomb.

There are several companies here that tout FSC certification.  That is a joke and will come crashing down when the inspections start.

Title: Re: rafting logs
Post by: LOGDOG on May 30, 2011, 07:47:43 PM
Thanks Jim. I actually did a Google search and uncovered some of those concerns this afternoon. We'll stick with the good old American logs and lumber for now I guess. That Ipe really catches my eye though.
Title: Re: rafting logs
Post by: kelLOGg on May 30, 2011, 09:26:33 PM
Quote from: Mooseherder on May 30, 2011, 05:24:46 PM
This is the process he mentioned back on reply 30. ;)

Quote from: Quebecnewf on May 17, 2011, 05:42:15 PM

I recall the description of the process but it's the orientation of the logs that surprises me ???
Bob
Title: Re: rafting logs
Post by: Hilltop366 on May 31, 2011, 07:37:11 AM
I'm guessing the logs at the far end in the picture will be the front of the tow.
Title: Re: rafting logs
Post by: kelLOGg on June 01, 2011, 05:24:22 AM
Quote from: Hilltop366 on May 31, 2011, 07:37:11 AM
I'm guessing the logs at the far end in the picture will be the front of the tow.

Ahh.. that would explain it. Makes better sense.  Thanks.
Title: Re: rafting logs
Post by: Quebecnewf on June 02, 2011, 07:57:27 AM
Left on Sun morning to pull logs to mill. Used the outboard to pull raft into channel and hooked up to the REEF RAT.

Started pulling at 9:00 AM . Three hours later arrived at the mill with 215 logs in tow. Things went very well made an avarage speed of 3 knots.

Worked with the ATV and skidding arch  untill around 7:00 PM hauling the logs up to the mill. Had a late supper and fell into the bunk for a well deserved rest.

Up again at 4:00AM and back at the logs. This time we had to use the front half of a snow sleigh instead of the skiidding arch (wheel fell off). Things went well and by 9:00 AM we had all the logs ashore and headed for home.

Pics will follow later today I hope (internet connection problems at home)

Quebecnewf
Title: Re: rafting logs
Post by: thecfarm on June 02, 2011, 08:07:36 AM
Glad things went well. All done rafting for this year?
Title: Re: rafting logs
Post by: isawlogs on June 02, 2011, 09:07:17 AM

  :)  Glad to hear all went well and you got all them logs back on shore. Looking forward at seeing the pics of the trip , ya got some nice country your way  :)
Title: Re: rafting logs
Post by: Quebecnewf on June 02, 2011, 07:36:52 PM
 

(https://forestryforum.com/gallery/albums/userpics/12408/3489/DSCF4084.JPG)

Here we have the log boom attached to the Reef Rat . We are just checking the lines to make sure if we are good to go. You cannot see it here but the boat is in the channel and 20 feet to either side there is only 4 ft of water and this is a high tide

(https://forestryforum.com/gallery/albums/userpics/12408/3489/DSCF4092.JPG)

View from the boat looking astern just before getting under way


(https://forestryforum.com/gallery/albums/userpics/12408/3489/DSCF4102.JPG)
Logs under tow


(https://forestryforum.com/gallery/albums/userpics/12408%3Cbr%20/%3E/3489/DSCF4093.JPG)
Another shot of towing

(https://forestryforum.com/gallery/albums/userpics/12408/3489/DSCF4106.JPG)

Logs at the mill 3 hours later

(https://forestryforum.com/gallery/albums/userpics/12408/3489/DSCF4109.JPG)

ATV and skidding arch (which broke after only about 20 logs ashore) but we got them all ashore after a while.

only 200 more left to tow home

Quebecnewf
Title: Re: rafting logs
Post by: Coon on June 02, 2011, 08:52:23 PM
Nice job on the logs.  Thanks for the pictures of the journey.   ;D
Title: Re: rafting logs
Post by: mikeb1079 on June 02, 2011, 09:21:17 PM
great stuff.  thanks for posting.
Title: Re: rafting logs
Post by: beenthere on June 02, 2011, 09:49:35 PM
Job well done, and well planned. Figuring everything out on top of having to work out the tide schedule plus the weather has to be satisfying when you win. :)
Title: Re: rafting logs
Post by: kelLOGg on June 03, 2011, 05:13:22 AM
Fascinating! Do you have a pic of the tow line attachment to the logs?
Bob
Title: Re: rafting logs
Post by: ljmathias on June 03, 2011, 06:50:59 AM
Beautifully done!  Thanks for showing us.  And I thought I had trouble getting logs to my mill... ;)

Lj
Title: Re: rafting logs
Post by: Magicman on June 03, 2011, 07:40:54 AM
Wow, thank you for sharing such an interesting operation.  From felling, bunching, and then "water skidding" it just demonstrates how we have to adapt to our surrounding and use nature as our helper/friend.

Title: Re: rafting logs
Post by: LOGDOG on June 03, 2011, 09:16:40 AM
Congratulations on a successful venture. Great pics. I like all that shield rock where the logs are beached. Reminds me of Ontario.
Title: Re: rafting logs
Post by: Ianab on June 03, 2011, 04:09:50 PM
I was at local sawmill yesterday and looking at some old pictures on the office wall. One of them was rafting some logs down a local river. A lot like the pictures that Jim posted, but from 100 years ago. Little steam powered river boats, and the loggers kids where out on the logs with Dad for the photo shoot. (or maybe they just rode the logs normally - it was in the pre OSH days.)

Just reminded me of this thread, that you aren't doing anything "new". 100 year ago they would have done the same things, but the boat would have been steam powered, and you would have used a horse or bullock to drag the logs out. This method worked for our great grandfathers, no reason it can't still work today.

Thanks for posting the pictures  :)

Ian
Title: Re: rafting logs
Post by: SwampDonkey on June 03, 2011, 04:39:32 PM
A 100 years ago? It's only been about 50 years ago here and maybe 15 on the Gatineau in Quebec. :D
Title: Re: rafting logs
Post by: Ianab on June 03, 2011, 05:33:01 PM
Quote from: SwampDonkey on June 03, 2011, 04:39:32 PM
A 100 years ago? It's only been about 50 years ago here and maybe 15 on the Gatineau in Quebec. :D

Or this year.  :D
Title: Re: rafting logs
Post by: paul case on June 03, 2011, 06:49:12 PM
this thread has been very interesting. thanks for posting it.

oh and happy birthday swamp donkey.

pc
Title: Re: rafting logs
Post by: cutterboy on June 03, 2011, 08:51:25 PM
This is a great thread. Thanks so much for posting it. Quebecnewf, you are the only person I know of who makes salty sawdust. :D
Title: Re: rafting logs
Post by: WDH on June 03, 2011, 09:16:33 PM
Logging is the most challenging aspect of milling in my experience.  You have some real challenges compared to most of us.  That is very impressive.