If you could see a video on using one of these layout tools in this picture:
(https://forestryforum.com/gallery/albums/userpics/10095/219/Layout_tool_groupd.jpg)
Which tool would it be?
Thanks for answering.
Jim Rogers
If I had to pick just one, I'd say "I". I've seen them referred to as "Big Al", but have never seen one used. Typically such a simple looking tool has been well though out to make life easier, but I've just never seen one in use. Once it's been fully explained, I'm sure I'll need to know where to get one.
F and B.
That's all you really need.
WHOOPS!
I forgot, you need another piece of string/cordage and a weight for a plumb bob.
Then you can do fine 17th-18th century joinery!
I'd second the big Al, I have read lots of hype (perhaps deserved) but never used or seen one.
That said, all the slick uses of a framing square could be more beneficial as thats a tool I use alot but don't use it to it's fullest.
Dave
R for me.
Probably not so much the tools per sae, but teaching scribe technique. Also teaching snap line square rule with twisted timber that you might otherwise cull. I haven't really worked with those techniques yet besides a demo, to have them down pat.
One thing I may demo on a video is my sharpening technique - sand paper method. I'm getting a new modern computer in the next week or two, and I'm going to get an decent editing software to play with editing myself.
Jim: you've opened up a can of worms or maybe better said, a well-stocked tool box. Each of the tools I use needs a video or two on its own, and some of those shown I don't even know what they are or could be used for- H and K for example. Starting with the Big Al is skipping all the tools you'd use before and after you get to it... so this means you also have a cart and horse problem: where to start, where to start.
Well, whatever is your first choice, I'm waiting with great anticipation. I applaud your willingness to spend the effort and time (assuming that's why you asked? :) ).
I once hosted a teacher training event for a week in the summer, and we thought it would be cool to teach them how to do video for classroom instruction. Brought in the head of that department on campus to help with this. His first words to the group were strange: "If you're thinking of doing video, don't." His point was, as he explained at length: only use video when you absolutely have to. It's hard to do right, it's expensive (was back then, not so much now) and most people learn just as well with good pictures and step-by-step instructions they can read over and over again as they digest the material and develop skill. He did point out, though, that for some things, video IS absolutely the best way to teach. For me personally, a combination of the two works great- a video to get started, showing in general the overall process, along with the step-by-step with pictures for me to study, then print and carry out to the barn where I'll try it out.
Lj
It will be a few days before I can tape, edit and produce a video as I am milling on site this week and don't have the mill here to make a fresh timber to use in the show.
Also, I am helping a client prepare for a raising this Sunday.
Thanks to all who have posted the selections. All will be considered and if they can be combined and used into one or two videos I will try my best to do so.
Note to self, find parallel line ruler.......
Jim Rogers
Either a Big Al or the framing square. Looking forward to whatever you decide. Maybe a whole series?
I agree with Brad. I would also say the "Big Al" and "A", the calculator...or at least all the trig it takes to figure complex angle's.
Thanks Jim!!!
DnD
Quote from: dukndog on September 14, 2011, 08:48:58 AM
I agree with Brad. I would also say the "Big Al" and "A", the calculator...or at least all the trig it takes to figure complex angle's.
Thanks Jim!!!
DnD
If you study your trig and analytic geometry you can do/layout the angles with a divider : )
Quote from: Mad Professor on September 13, 2011, 10:16:08 PM
F and B.
That's all you really need.
x2 on F/B. Most of the info out there assumes straight sticks, 90deg faces and mill and square rule.
As most of us know, that's not always the case for whatever reasons. Knowing how to deal with "special" sticks, can give a framer the confidence to tackle anything/everything thrown at them ;) Framing is so much more fun when you can pick up any (and I mean ANY) pc of wood and make it work in whatever you're working on IMO.
When cutting/splitting wood earlier in the season, I pulled a dozen or so pcs that I thought did not deserve to be burnt :D One day they will make very handsome, naturally curved braces 8)
K and R. Don't know how to use either.
Once you go to Big Al, that's it, you never look back!
And, I'm glad the Big Al is tough. You can drop that tool on the driveway many times and it still stays square.
Any would be good. But I'd also like a good snap line square rule guide which would use some of these tools pretty heavily. There is a thread on this board already "Dealing with out of square timbers" that a member describes/uses it. But it would be nice to have a methodical step by step process for doing it correctly and efficiently.
I would say "D", the framing square. Sure I use one regularly, but there are many hidden or unknown "secrets" stored in it.
On another tool; many folks, even some experienced carpenters, don't know what the little "diamond" that is printed about every 19" on "N" represents.
Big Al and framing square.
I've got a Big Al in my barn that I really never used. We used snap lines to lay out my frame, so Big Al didn't work the way we did it. If anyone wants it, I'd probably be willing to part with it for the right price.
Quote from: Magicman on September 15, 2011, 02:49:20 PM
I would say "D", the framing square. Sure I use one regularly, but there are many hidden or unknown "secrets" stored in it.
On another tool; many folks, even some experienced carpenters, don't know what the little "diamond" that is printed about every 19" on "N" represents.
Floor joist or roofing stringer marks that fall out a even 48" for layout is what I used them for. Most good tapes have them also.
I have completed some videos about the tools on the list.
Some of the videos I was thinking of sharing were the recent ones I did.
I haven't finished editing them yet, so they would be some what "raw" videos. But you could still get some useful information out of them.
For first hand exclusive look at these sign up for this Sunday morning "chat/coaching" session.
My vote is for the I or the ;D Big Al I just ordered one from the TFG and am playing with it in the basement, my second choice would be the Framing Square.
Mike
I have had the Part one video on using layout tools edited for a few days.
I have been trying for several days to get it to play on my "videos" page on my web page.
I just got off the phone with tech support from my web page hosting company and they helped me understand the code and address to use to get the windows media file to play.
If you scroll to the bottom of the video page beyond all my YouTube videos, you'll see a blue link to the first part of the layout tools video. It should open in a window media player.
Please check it out and see if it plays for you. And if it doesn't please let me know.
You may want to keep the kids away from the computer screen while it's playing, that big hairy timber framer who talking there my scare them a little. :D
I'll be editing more of the videos I shot and will be posting them soon.
Jim Rogers
PS. here is a direct link to my video page http://jrsawmill.com/Videos%20page.htm
Unless I'm at work video chat is not happening, I'm on dialup .............
It doesn't play on the page. If I click the link it starts to download the video (121 MB), which would take a long time for me and eat up a lot of space. Not going to do it. It needs to be hosted like your other vids.
I downloaded it and had no problems--except finding it on my HD. It didn't download into my download folder, but I did find it so I can play it anytime. 8)
Plays fine without the need to download.
I got this information about watching Windows Media Files from another forum.
quote:
If you have to download a video please read this.....
....if your machine has an "axe" for a program, then the file extension is not associated with a default program. In windows 7 go to start, default programs, associate a file type .... and scroll down to wmv ext. -- click "change program" and select "windows media player"
You may want to switch your Browser to Firefox and use their download plugin. With Firefox's download plugin, they stream videos, and therefore they start almost immediately after a small buffer. Explorer uses temp files -- have to wait for temp file to be created.
End quote.
Try this and see if it works for you.
I have added more videos to my layout tools videos page.
Let me know if you're having trouble accessing them.
Thanks.
Jim Rogers
Found it- not on your video page but on your home page? Maybe you'd want to change your link to go to that page instead?
Also, very, very slow buffering even on high speed wireless, unless there's something wrong with it here...
Lj
Quote from: danreed76 on September 13, 2011, 09:47:42 PM
If I had to pick just one, I'd say "I". I've seen them referred to as "Big Al", but have never seen one used. Typically such a simple looking tool has been well though out to make life easier, but I've just never seen one in use. Once it's been fully explained, I'm sure I'll need to know where to get one.
Hey Jim.
I was willing to help. Scribe rule
TT
Tony:
I will need some guidance with scribing. I don't have a lot of experience in the method of layout.
Jim Rogers
I've never learned English scribing, but know the basics of French & modern bubble scribe techniques.
It's compound joinery (& the math for it) I need to tackle next.