Print Page - My home made draft control for a Shaver OWB

Title: My home made draft control for a Shaver OWB
Post by: yellowrosefarm on January 12, 2013, 06:24:21 PM

I finally finished and installed my version of a draft control on a Shaver OWB. The solenoid I got from grainger along with the larger fan unit (75cfm vs the 50 it came with). The 3" pipe and rain cap came from NAPA. I also put a gate latch on the door that closes when you slam it.

(https://forestryforum.com/gallery/albums/userpics/19840/HPIM1416.JPG)

(https://forestryforum.com/gallery/albums/userpics/19840/HPIM1417.JPG)

(https://forestryforum.com/gallery/albums/userpics/19840/HPIM1418.JPG)

Title: Re: My home made draft control for a Shaver OWB
Post by: thecfarm on January 12, 2013, 10:12:44 PM

My Heatmor has flappers that open when the fans comes on. When I turn my light switch on that cuts power to the fans so if I'm filling it the fans can not come on.

The Forestry Forum

General Forestry => Firewood and Wood Heating => Topic started by: yellowrosefarm on January 12, 2013, 06:24:21 PM