Print Page - Sawing old électric pole (red cedar)

Title: Sawing old électric pole (red cedar)
Post by: Jaws on May 09, 2004, 07:37:05 PM

Last week I saw 3,450 bdf of old pole. The guys want 4" X 17' for make a floor in this garage. I saw 4" x 8" , 4" x 9", 4" x 10" and three 4" x !2".

(https://forestryforum.com/images/03_21_04/Scierie%20April%20029.jpg)

(https://forestryforum.com/images/03_21_04/Scierie%20April%20023.jpg)

(https://forestryforum.com/images/03_21_04/Scierie%20April%20024.jpg)

(https://forestryforum.com/images/03_21_04/Scierie%20April%20026.jpg)

;D :D :D

Title: Re: Sawing old électric pole (red cedar)
Post by: BW_Williams on May 09, 2004, 07:55:20 PM

Those are pretty nice looking poles for used, are you sure there's not some village out there with no electricity? :D BWW

Title: Re: Sawing old électric pole (red cedar)
Post by: etat on May 10, 2004, 05:26:31 AM

:D :D :D :D

Title: Re: Sawing old électric pole (red cedar)
Post by: slowzuki on May 13, 2004, 01:13:24 PM

Nice looking work Jaws! Those bus frames are harder to get than I thought, everyone has buses in their scrap yard but they use em for storage!
Ken

Title: Re: Sawing old électric pole (red cedar)
Post by: Bob_T on September 01, 2004, 09:07:48 AM

Jaws,

Nice looking wood, from here the sawed boards look like oak.
How is that clutch you made working? Good, I hope. That is a good looking mill. Have you ever thought about selling plans for it?

Bob

The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: Jaws on May 09, 2004, 07:37:05 PM