i had found a few saws at a local pawn shop and went to www.acresinternet.com to get some info. the site seams to be down , can anyone share some insight?
the saws of interest were 038av,045av(could be046/048 cant remember to many numbers so close together)
thanks
dan
Dan;
What specific information are you looking for ?
size,hp,production years so i could make a dission on purchase.
the acresinternet site had better info than the sthil site unless i just cant figure out how to get info other than current product.
thanks
dan
038 is 61cc
045 is 75cc
thanks for the size info .
i was looking at a larger saw for milling some softwood (8"to20")
both these saws seem to be in clean and deceant condition with sthil bars .
the prices are in the 250 to 300 range.
have i missed anything on the sthil site re older saw info?
thanks
dan
;D
Mike's site will likely be back up in a day or two. Sometimes it goes down and needs a kick, but Mike can't kick it on a holiday weekend. It's been down before and will be down again, but Mike's site is an excellent source of info.
8)
I have milled 12-15"softwood with a 62cc saw and it works but I wouldn't advise it.
It's ok for a few sticks but the saw is really working hard.
It's possible the 038 is a 72cc saw; there were alternate iterations.
Sure is aggravating about Acres' site, but it's worth it when up.
The 72cc is the AVMERQZ I believe.
There are a few versions AV, AVE, AVEFB, FB which are the 61cc jobs.
well wouldnt you know that the site goes down when i try to get info to sort of point me i a direction.
the bigger sthil is a 048av .called 2 local sthil dealers and all they know about is the ms460 at 1000 +.any insight on the 048av is appreciated.
thanks
dan
048AVE is 76cc.