The Forestry Forum
General Forestry => Chainsaws => Topic started by: PaYoungBuck on January 27, 2014, 09:07:02 PM
In the process of switching to all 50 gauge bars and chain on all my saws one has only ever ran 58 are the sprockets the same on the saw for both. The saw in question is a jonsered 2186 thanks
Yes your drive sprocket will take .050 .058 .063.
Thanks for some reason my brain isn't working guess I have to much going on the skidder is in the shop so I'm trying to do a million things while I'm down.
Keep in mind that it is much better to change sprocket rims more often than really needed, than to wait too long. Rims are by far the cheapest component in your cutting attachments. ;)