The Forestry Forum

Were can i go to get my truck and trailer frame rust sand blasted off and undercoated for a good price.

Is there such a thing as a good price  :D, I'll about bet your flip when you do get a price, around here I believe its in the two grand plus to get the rails blasted. Good luck Bill

Around here we have a shop that will do that. He gets about $900 to blast and epoxy paint a pick up chassis if you pull the cab and bed.

id get a needle scaler and do it your self, thats what we do. we use POR15 and it seems to hold up really well its expensive though

Can a needle scaler get in between stuff like the tank and the top of the frame

Needle Scaler ????????  :-\

http://www.ingersollrandproducts.com/am-en/products/tools/surface-preparation-finishing-tools/needle-chisel-scalers/industrial-production-needle-and-chisel-scalers/in-line-needle-chisel-scalers/needle-scalers

thats similar to the one we have, just about anywheres you can reach your hand you can get the rust ect off, it really works the best in the seams and stuff which is where the majority of rust will be, usually the flat surfaces dont have much for rust.

James Bray use to do all of our sandblasting and painting on trailers. Hes out of saqouit. Runs a construction company too.