The Forestry Forum

Sponsor News => LogRite Tools and Rite Leg Co => Topic started by: Tam-i-am on July 07, 2014, 05:22:57 PM

Title: Patten Lumberman's Museum
Post by: Tam-i-am on July 07, 2014, 05:22:57 PM
Logrite had the opportunity to visit the Patten Lumberman's Museum in Patten, ME.

They had several buildings on site.  1820 Camp (constructed with axe and froe, pegs- no nails)  Very small inside.


 (https://forestryforum.com/gallery/albums/userpics/11461/1820_camp.jpg)

They also had a horse hovel, saw mill, blacksmith shop, another camp from 1850's.
Very interesting place.  Lots of old tools.  Learned a few things.

Like that the guys ate 4 meals a day: breakfast, first lunch, second lunch and dinner.  The rules for eating in the galley were interesting- the guys were not allowed to talk while they ate because talking wasted time and made a lot of noise!  I think I might put this rule in use at our house. :D  check out the tin place settings


 (https://forestryforum.com/gallery/albums/userpics/11461/galley.jpg)

Guys must have been shorter as width of three bunks were as long as our beds today.  Hope they liked there coworkers!


 (https://forestryforum.com/gallery/albums/userpics/11461/bunks.jpg)

Ok now for the tools.  Do you know what a swing dingle is?  predates the peavey, what gave Peavey the idea for the Peavey.


 (https://forestryforum.com/gallery/albums/userpics/11461/swing_dingle.jpg)
Here is another one mounted on a pole and hanging in the camp.


 (https://forestryforum.com/gallery/albums/userpics/11461/single_dingle_hook.jpg)
Supposedly Peavey saw the guys struggling with the dingle hook and pike poles, so combined the two to make the peavey. Below is pike pole.


 (https://forestryforum.com/gallery/albums/userpics/11461/pike_pole.jpg)

Kevin's favorite thing was the Lombard shed where the 2 Lombard log hauler was stored.


 (https://forestryforum.com/gallery/albums/userpics/11461/log_hauler.jpg)

Title: Re: Patten Lumberman's Museum
Post by: Tam-i-am on July 07, 2014, 06:05:31 PM
There were two other things that caught my attention.
It was obvious the work was dangerous, working conditions would never pass any of OSHA's present standards and wages were low.  Living conditions weren't much better.  The guys would cut all fall and winter and drive the logs down the river in the spring. They didn't see their families all that time.


 (https://forestryforum.com/gallery/albums/userpics/11461/rate_schedule.jpg)


This next pic was in there as an oddity.  They had several burls and trees that grew together and such.  All interesting but this one really stuck out for some reason.  At first, I thought it must be a Logrite because the hook bit right in and wouldn't let go and so was then abandoned by the owner.  I quickly came to my senses and realized that the handle had rotted away and that just can't happen with a Logrite.  Mine would still have a handle! ;D



 (https://forestryforum.com/gallery/albums/userpics/11461/stuck_hook.jpg)
Title: Re: Patten Lumberman's Museum
Post by: Mooseherder on July 07, 2014, 06:53:29 PM
They paid the Cooks the most.  I was surprised to see that.
Title: Re: Patten Lumberman's Museum
Post by: WDH on July 07, 2014, 08:40:05 PM
I saw that too  :D.
Title: Re: Patten Lumberman's Museum
Post by: thecfarm on July 07, 2014, 08:47:16 PM
The cook was the Main Man for the camp. Those men worked hard and needed a good diet to keep going. I would not want a hundred hungey men mad at me.
I can still hear my Father tell me he use to shovel gravel in a truck for a buck a day. That would of been around the late 30's.
Title: Re: Patten Lumberman's Museum
Post by: Magicman on July 08, 2014, 07:30:59 AM
Thanks Tammy for sharing a bit of history.   smiley_thumbsup
Title: Re: Patten Lumberman's Museum
Post by: Tam-i-am on July 08, 2014, 09:22:40 AM

Quote from: Magicman on July 08, 2014, 07:30:59 AM
Thanks Tammy for sharing a bit of history.   smiley_thumbsup

I wish I had brought my camera and took more pictures.


So no one knows what a swing dingle is?  I think it is clever but can see why it is frustrating to work with.

Clever because it is easy to pack and carry in, then pound it through any pole for a handle.