Now don't go reporting this to the moderator! :)
http://youtu.be/lI4S6hWyJNE
Looks to be working fine now!!
Jeff
thanks for the great video. I hope it goes viral!
Tammy
I'm thinking that now that it is working, you may need to work on the color problem. ;D
I like dat stuff.
Wonder if it will help my slide bolt, the action is a little slow on it ??? ???
It helps anything. :)
Pat wanted to know what I was chuckling about, so she watched the "re-run". :D :D
The video production was almost as good as the product.
Quote from: Jeff on February 05, 2015, 02:34:23 PM
It helps anything. :)
I wonder if I stuck the applicator into my knee and injected some into it, would it help it move better? ::) ::) ::) ::) ::) :o
Quote from: submarinesailor on February 09, 2015, 09:06:01 PM
Quote from: Jeff on February 05, 2015, 02:34:23 PM
It helps anything. :)
I wonder if I stuck the applicator into my knee and injected some into it, would it help it move better? ::) ::) ::) ::) ::) :o
I'd be jumping for joy if it worked on human joints ;)
It will marinate a hog.
(https://forestryforum.com/gallery/albums/userpics/20011/DSCN0029_28Small29.JPG)
I know what it looks like Jeff is doing, but I assure you that is not what Jeff uses to make the pig taste so good!!!!!
8)
I've even used the stuff on clock works. I have a mechanical clock here where the case does not fully enclose the works because there is a bell on top that is struck by a hammer. So it is prone to dust. I do clean the thing, but you can't get it all. That Blue Creeper keeps her ticking. In fact that thing never ran right for decades until I used the Creeper. ;D
It's a Dutch Delf clock which can still be found online. I found one site that had a lot of them.
This youtube shows the same clock.
http://www.youtube.com/watch?v=qU6T2IYrjl8
So I guess Blue Creeper rings my bell. ;)
I rarely check into the sponsorship section. Glad I did today. Thanks for the laugh. I need to get me some of that creeper. Lots of things in my world don't work as they should.
Want to load some cast bullets for my 30-30 contender. Thought my lubricator sizer that I havn't used for over 20 years and was all froze up with rust was shot.
Some bluecreeper and it is free. Now just have to get some gas checks and a stick of bullet lube.
We have a big old grandfather clock that strikes the hour and quarter hour. Lots of moving parts. Blue creeper keeps it going, needs a squirt a couple of times a year...
The old clock needed another dose of creeper. Good for another year or two.
coocoo_clock
8)