Text only | Text with Images

The Forestry Forum

General Forestry => Forestry and Logging => Topic started by: BargeMonkey on April 14, 2015, 10:27:29 PM

Title: Timbco Saw heads.
Post by: BargeMonkey on April 14, 2015, 10:27:29 PM
having oiler troubles on my barsaw head, its not junk in a line, oil holes are good and it isnt the bar. Anyone been down this road before i dive too deep into it ?
Title: Re: Timbco Saw heads.
Post by: timbco68 on April 14, 2015, 10:42:45 PM
it's been awhile since we had one but 1st check both check valves on the oiler.Most of my problems were in one of the 2 check valves.9 times out of 10 the problem will be there.Had some dirt or bark float over the oiler tank outlet and give problems too.Good luck.
Title: Re: Timbco Saw heads.
Post by: BargeMonkey on April 14, 2015, 11:00:56 PM
thank you, planned on tearing into it when i got home.
Title: Re: Timbco Saw heads.
Post by: lopet on April 14, 2015, 11:44:23 PM
Did you get another Timbco ?
Title: Re: Timbco Saw heads.
Post by: BargeMonkey on April 15, 2015, 08:40:10 AM
Quote from: lopet on April 14, 2015, 11:44:23 PM
Did you get another Timbco ?
Only sold that big grapple i had this winter. Got a whopping 4601 hrs on the Timbco now, getting to be a high hrs unit.  :D
Text only | Text with Images