Print Page - Options for a 48" circular saw with 4 1/2 5 insert teeth

Title: Options for a 48" circular saw with 4 1/2 5 insert teeth
Post by: mclean on September 11, 2015, 12:03:05 PM

Is there a source for these 4 1/2 5 teeth?

Is it best to buy a new blade?

Thanks again!

Title: Re: Options for a 48" circular saw with 4 1/2 5 insert teeth
Post by: beenthere on September 11, 2015, 01:55:38 PM

Might be best to contact Menominee Saw (sponsor seen on left column).

Title: Re: Options for a 48" circular saw with 4 1/2 5 insert teeth
Post by: lawnsbylane on September 11, 2015, 09:12:57 PM

mclean I think I may have some bits left over from several I can look tomorrow and let ya know.

Title: Re: Options for a 48" circular saw with 4 1/2 5 insert teeth
Post by: mclean on September 13, 2015, 06:48:13 PM

(https://forestryforum.com/gallery/albums/userpics/39051/IMG_20150913_153046.jpg)

Here's a shot of the teeth, some are stamped with a 2 beside the 4 1/2 5.

Title: Re: Options for a 48" circular saw with 4 1/2 5 insert teeth
Post by: beenthere on September 13, 2015, 07:23:08 PM

Ironic that your background blends in so well with the curvature of the teeth.

Title: Re: Options for a 48" circular saw with 4 1/2 5 insert teeth
Post by: dgdrls on September 14, 2015, 05:50:50 AM

Mclean,

Menominee for certain, they will fix you up
http://www.menomineesaw.com/

how many teeth??

Dan

The Forestry Forum

General Forestry => Sawmills and Milling => Topic started by: mclean on September 11, 2015, 12:03:05 PM