Text only | Text with Images

The Forestry Forum

General Forestry => Chainsaws => Topic started by: Robrike on August 15, 2016, 08:54:16 PM

Title: Stihl 025 Anti Vibration Mount Question
Post by: Robrike on August 15, 2016, 08:54:16 PM
Hi.
I just picked up a Stihl 025 yesterday and was going over it last night.  One of the anti vibration rubbers is missing on the right side near the muffler and brake handle area.  I can get another but was wondering if that one is a pressing fit or if it has a torx screw that should hold it in?  Right now it is just two openings that line up as seen in the photo.  Hoping a piece of housing isn't broken that screw would run in. 

Thanks for any information.

Robert
Title: Re: Stihl 025 Anti Vibration Mount Question
Post by: joe_indi on August 16, 2016, 12:53:25 PM
No screw. It is press fitted on both sides with caps/plugs
Joe
Title: Re: Stihl 025 Anti Vibration Mount Question
Post by: motohed on August 17, 2016, 02:09:06 PM
If your missing a mount , you may want to replace them all and save the old ones for spares .
Title: Re: Stihl 025 Anti Vibration Mount Question
Post by: Texas-Jim on August 18, 2016, 10:39:38 AM
They are called Annular buffers and are three types. Two actually have a a screw.The one without screw just snaps in isnt in parts smart from stihl. But parts smart sucks so cant really depend on it. But for 6 bucks each ask a dealer, he might have call make sure still available.
Text only | Text with Images