Print Page - .058 D009 to a 050 vD025/3003 mount help?

Title: .058 D009 to a 050 vD025/3003 mount help?
Post by: ReggieT on May 26, 2017, 02:53:24 AM

I have 5 18" Tiger Champ bar .058 3/8 and need them to fit a Sthil mount saws
Trying to go from a " D009 to a D025/3003 mount.

Got anything adapter wise or advice?
Thanks

Reg

Title: Re: .058 D009 to a 050 vD025/3003 mount help?
Post by: HolmenTree on May 27, 2017, 09:25:42 AM

You can only file out the slot larger to fit the larger Stihl mount. Plus a new tensioner hole may have to be drilled. Oil holes should be close enough.

Title: Re: .058 D009 to a 050 vD025/3003 mount help?
Post by: ReggieT on May 29, 2017, 04:12:55 AM

Thanks,
Looks like I've got to go from about 9.0mm to 12.1mm width.
I've got a machine shop bud who is dynamite with this sort of stuff...although he come up MIA a lot lately.
The tensioner holes are pretty close & oil holes look well...I'll double check.

The Forestry Forum

General Forestry => Chainsaws => Topic started by: ReggieT on May 26, 2017, 02:53:24 AM