The Forestry Forum

Commerce => For Sale => Topic started by: Mooseherder on January 20, 2020, 10:04:02 AM

Title: Lane Circle Mill
Post by: Mooseherder on January 20, 2020, 10:04:02 AM
Lane Circle Mill with Hydraulic Conversion for sale $12,000.00 obo
Will also consider trade up or down for Excavator, Tractor, side by side, Harley, what you have?

Mill is powered by a John Deere T04045 Industrial Motor with Rockford PTO. Motor has approximately 1000 hrs. on it.
The Husk Deck is Steel with Hydraulics and controls.
Oil Tank and 90 gallons of Hydraulic Oil included.
The Carriage is rebuilt with new wood.
The 60 ft.Track Wood is all new Pressure treated 6x6.
There are 2 Saw Blades with the Mill but you will most likely need a new one.
1 Sawdust conveyor with 110 motor.

(https://forestryforum.com/gallery/albums/userpics/13635/mill14.JPG?easyrotate_cache=1579525908)
(https://forestryforum.com/gallery/albums/userpics/13635/mill3.jpg?easyrotate_cache=1579525228)
(https://forestryforum.com/gallery/albums/userpics/13635/mill4.jpg?easyrotate_cache=1579525259)
(https://forestryforum.com/gallery/albums/userpics/13635/mill5.jpg?easyrotate_cache=1579525292)
(https://forestryforum.com/gallery/albums/userpics/13635/mill6.jpg?easyrotate_cache=1579525338)
(https://forestryforum.com/gallery/albums/userpics/13635/mill1.JPG?easyrotate_cache=1579525120)
(https://forestryforum.com/gallery/albums/userpics/13635/20180914_173950.jpg?easyrotate_cache=1539916701)
(https://forestryforum.com/gallery/albums/userpics/13635/20180914_174657.jpg?easyrotate_cache=1539916417)
(https://forestryforum.com/gallery/albums/userpics/13635/20180914_174740.jpg?easyrotate_cache=1539916360)
(https://forestryforum.com/gallery/albums/userpics/13635/20180914_160848.jpg?easyrotate_cache=1539916165)
(https://forestryforum.com/gallery/albums/userpics/13635/20180827_121146.jpg?easyrotate_cache=1535425211)
(https://forestryforum.com/gallery/albums/userpics/13635/20180821_100223.jpg?easyrotate_cache=1535418816)
(https://forestryforum.com/gallery/albums/userpics/13635/20170829_115454.jpg?easyrotate_cache=1504270428)
(https://forestryforum.com/gallery/albums/userpics/13635/20170830_101806.jpg?easyrotate_cache=1504270203)

This mill motor also powered an Edger, Resaw and Chipper through a series of Pulleys, belts and gearing that is available and could be negotiated.

Also available is a 30 foot Log Deck with foot switch that runs on 110. The motor on it has been outside for 13 years so probably needs replacement.  $2500.00
(https://forestryforum.com/gallery/albums/userpics/13635/mill9.jpg?easyrotate_cache=1579525694)
(https://forestryforum.com/gallery/albums/userpics/13635/mill10.jpg?easyrotate_cache=1579525725)

Precision Chipper size 38 with 12 foot arched chute.  $3500.00
Comes with Knife Sharpener.
Gravity fed, put flitch in and walk away.  Comes with Dodge Gearbox for rpm reduction.
(https://forestryforum.com/gallery/albums/userpics/13635/20170821_191107.jpg?easyrotate_cache=1503752174)
(https://forestryforum.com/gallery/albums/userpics/13635/20170821_191046.jpg?easyrotate_cache=1503752368)
(https://forestryforum.com/gallery/albums/userpics/13635/20170821_190943.jpg?easyrotate_cache=1503752614)

Board Sizer in Background of Chipper, 110 motor. $2000.00 obo.
Would make excellent green chain mover for production.

3-20 foot sawdust conveyors that run on 110 motors.  One is included with the mill purchase.
The other 2 are for sale 1000.00 each.
These 3 units were 7 grand when built.
One was under the Saw Blade, One under the edger and resaw.  The other outside for stacking.
If your looking for a Circle Mill don't let this one get away.
I can help with loading and lining you up with a couple of local Truckers if needed.

I have read, understand, and agree to the terms of posting an ad on the Forestry Forum.
Title: Re: Lane Circle Mill
Post by: moosehunter on January 20, 2020, 12:32:14 PM
Maine or Florida? Nice looking mill. I'm not in the market but if I were,... 

mh
Title: Re: Lane Circle Mill
Post by: Mooseherder on January 20, 2020, 12:43:08 PM
The Mill is in Northern Maine Zip 04785.  Anymore north, you're in Canada. :D
Title: Re: Lane Circle Mill
Post by: ljjoe on February 16, 2020, 10:11:44 PM
Hello, I will be up in the area in a couple weeks.  Could I see it operation.
Lumberjack Joe
Title: Re: Lane Circle Mill
Post by: Mooseherder on February 17, 2020, 09:16:35 AM
I will be there on other business but am available.  We could snowshoe in if you want to see it.  There is a pretty big snowbank at the end of the driveway.  It would be better the see in May when the snow is gone.