The Forestry Forum

General Forestry => Chainsaws => Topic started by: foresthawk on November 09, 2005, 07:40:45 PM

Title: re: sprocket bearings
Post by: foresthawk on November 09, 2005, 07:40:45 PM
 I am working on an old  Craftsman chainsaw, and am in need of  a sprocket bearing. (old one is disintegrated).  I have checked and cannot get them through Sears parts (although I can get the sprocket.)
My question:  Where can sprocket bearings be obtained for this (and any other older saws?  - I have others as well.)   
 Thank you for any feedback.
Title: Re: re: sprocket bearings
Post by: Kevin on November 09, 2005, 09:11:35 PM
Is that for a 7/16 shaft?
Title: Re: re: sprocket bearings
Post by: Chris J on November 10, 2005, 01:24:08 PM
FH, I might be able to help, do you have the sprocket part #?  Most of what I have are spur sprockets.
Title: Re: re: sprocket bearings
Post by: foresthawk on November 10, 2005, 08:55:34 PM
 The Sears part no.  is  9089H , listed as a  "needle bearing."
 It is actually the sprocket bearing -  the bearing on the shaft the clutch and sprocket ride on.
   the shaft diameter is  7/16 inch.
  The chainsaw model no. is    917.353750
Title: Re: re: sprocket bearings
Post by: Kevin on November 10, 2005, 09:01:51 PM
Oregon(Blount) should have them, write their tech staff and ask them, it's probably a Poulan saw.
Ask about this part number 28006, sprocket and bearing.