MS361 bogs/stalls out mid throttle

[4lane]

My saw runs great, isles nicely, snappy trigger, powerful wide open. But when feathering the throttle or anywhere in between idle and wide open, it'll bog down until it dies. I thought I had the carb adjusted perfectly, and didn't find anything in the carb after taking it apart. Any ideas?

[Mad Professor]

Have you tried richening up the Low on the carb?  What is it set at now?

[ladylake]

 Yes open up the low around 1/4 turn, the high is likely lean also.  Don't burn it up.  Steve

[4lane]

Thanks guys, I'll try this. I was hesitant because I had set the carb to what I thought was perfect. Idle speed was good with no chain movement, trigger was snappy/responsive on the low end, and just starts to burble at WOT. That was a little while ago, so I'll give it a do over. Maybe it moved out of adjustment over time. Here is my carb tuning guide:

Adjustment and Tuning of a Chainsaw Carburetor | Chainsawr

[Mad Professor]

This might help