What kind of edger do I have?

[Kraynes]

Recently purchased this edger and trying to identify the brand in order to purchase new blades.
Currently it has 12" DIA split blades, 3" center hole. 4 bolts per set. bolt holes are 3-1/4" center to center.
Woodmizer suggested i post here with pictures and someone would know what i have.

Any help/info is greatly appreciated.

 

 

 

 

 

[Southside]

Call Darin at Riehl Steel. That machine has a lot of similar characteristics as his machines. 

[Sedgehammer]

The registered agent for Conveyors/Plus Inc is Bernard Martin. Here's his current phone number. 603-369-3087. If that's not his number, there a few more possibilities. 

There's also 2 possible emails

highlineequipment@comcast.net
coastalliquidators@gsinet.net

[moodnacreek]

It is what it says on the tag. You can have any saw made with B.H. Payne or they may have them.  On most edgers the shift collars wear and the shaft itself over time. The service of a machine shop is almost always necessary to fix up any edger that is not currently in production.

[Bruno of NH]

Looks like a Frontier to me 

[moodnacreek]

I was a little off on my reply as to the name of said edger. They did have a name for it: Century 24 , model 24s. Cost around $6000 in the eighties and came with 14" split saws . It is a 4x24 edger.  The tag always said conveyors plus.

[Kraynes]

Really appreciate all the help/info. Darrin @ Riehl Steel was unfamiliar with the machine but offered to help source Blades if needed. 
A quick Google search revealed a vintage ad for the century 24 and appears that is what i have.
hopefully with knowing the name/manufacturer i will be able to gain more info.

Thanks again!