iDRY Vacuum Kilns

Sponsors:

What kind of tree is this with no bark?

Started by fluidpowerpro, February 12, 2023, 12:53:28 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

fluidpowerpro

I'm currently visiting San Antonio Tx so I'm seeing some trees we don't have in MN. What kind is this one without bark? I see a bunch of them on the Riverwalk.

 

 

 
Change is hard....
Especially when a jar full of it falls off the top shelf and hits your head!

Local wind direction is determined by how I park my mill.

doc henderson

It has a twist, and the one seems to have some bark, and I thought I imagined some balls in the tree tops, poss. sycamore?  not really knobby enough.  the first one has a very "upright" form.
Timber king 2000, 277c track loader, PJ 32 foot gooseneck, 1976 F700 state dump truck, JD 850 tractor.  2007 Chevy 3500HD dually, home built log splitter 18 horse 28 gpm with 5 inch cylinder and 32 inch split range with conveyor powered by a 12 volt tarp motor

Crusarius

I was thinking if it didn't have bark it would be naked :)

or would the bite be what gets you? :)

fluidpowerpro

Although the leaves are now dead I was able to find one still attached and it somewhat resembles that of a maple.
Change is hard....
Especially when a jar full of it falls off the top shelf and hits your head!

Local wind direction is determined by how I park my mill.

Smallmill

Never been to Texas but the V shaped tree has a Zelkova look to it. Sycamore or planetree on straight tree maybe 

beenthere

Doc has it, Sycamore (Platanus occidentalis)  and the leaf is like maple, but 3 lobed. 

south central Wisconsin
It may be that my sole purpose in life is simply to serve as a warning to others

Southside

A Dogwood that went to the vet and got debarked.  :D. But yes, Sycamore.
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

Magicman

The first slick bark tree looks more like a Crepe Myrtle.  The others are Sycamore.
98 Wood-Mizer LT40 SuperHydraulic    WM Million BF Club

Two: First Place Wood-Mizer Personal Best Awards
The First: Wood-Mizer People's Choice Award

It's Weird being the same age as Old People

Never allow your Need to make money
To exceed your Desire to provide Quality Service

doc henderson

my first response was going to be a "dead tree"  glad I went with sycamore.  maybe the first one is just a "sick a more"!
Timber king 2000, 277c track loader, PJ 32 foot gooseneck, 1976 F700 state dump truck, JD 850 tractor.  2007 Chevy 3500HD dually, home built log splitter 18 horse 28 gpm with 5 inch cylinder and 32 inch split range with conveyor powered by a 12 volt tarp motor

Southside

I think you can see the puff balls in the first photo.
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

doc henderson

yes, but i was not sure if it was from that tree, or the one behind it.   :)
Timber king 2000, 277c track loader, PJ 32 foot gooseneck, 1976 F700 state dump truck, JD 850 tractor.  2007 Chevy 3500HD dually, home built log splitter 18 horse 28 gpm with 5 inch cylinder and 32 inch split range with conveyor powered by a 12 volt tarp motor

fluidpowerpro

Thanks guys, at least I learned one thing today!
Change is hard....
Especially when a jar full of it falls off the top shelf and hits your head!

Local wind direction is determined by how I park my mill.

Texas Ranger

The Ranger, home of Texas Forestry

Old Greenhorn

It's not an error, it's just a gap in his education. :D :D
Tom Lindtveit, Woodsman Forest Products
Oscar 328 Band Mill, Husky 350, 450, 562, & 372 (Clone), Mule 3010, and too many hand tools. :) Retired and trying to make a living to stay that way.  NYLT Certified.
OK, maybe I'm the woodcutter now.
I work with wood, There is a rumor I might be a woodworker.

Don P

I could wander under those bridges admiring them for some time, have a snack and do it again. Umm, I think Mission San Juan is pretty close, its cool. Oh, they have a good arboretum too.

Smallmill

I didn't realize I had a Texas sized gap.. I'll have to work on that

fluidpowerpro

Was walking along the River Walk some more this evening and took note of how many huge trees there are in the area. It was already dark so couldn't get any pictures of the top. Are these also Sycamore?

 

 
Change is hard....
Especially when a jar full of it falls off the top shelf and hits your head!

Local wind direction is determined by how I park my mill.

Ianab

Bark is wrong for Sycamore. Sycamore is quite distinctive as the bark is thin and flaky, and patches randomly peel off leaving white splotches all over the trunk. 

Pictures of some here.
https://en.wikipedia.org/wiki/Platanus_occidentalis

Not sure what that tree is, almost has a "softwood" look to the bark, reminds me of Japanese Cedar. But without a few more pictures  ??? ???  Being an ornamental,  and the Texas climate, it could almost anything, and likely not a local species at all. 
Weekend warrior, Peterson JP test pilot, Dolmar 7900 and Stihl MS310 saws and  the usual collection of power tools :)

fluidpowerpro

Quote from: Ianab on February 15, 2023, 11:50:55 PM
Not sure what that tree is, almost has a "softwood" look to the bark, 
If softwood, maybe Cottonwood?
Change is hard....
Especially when a jar full of it falls off the top shelf and hits your head!

Local wind direction is determined by how I park my mill.

beenthere

Agree, looks like cedar bark. Fyi, cottonwood is not a softwood.

Now where did you get the model with the fancy lighted hat?
south central Wisconsin
It may be that my sole purpose in life is simply to serve as a warning to others

fluidpowerpro

She's an aspiring tree model thats hoping to break into the tree show circuit, and also my significant other. 
Change is hard....
Especially when a jar full of it falls off the top shelf and hits your head!

Local wind direction is determined by how I park my mill.

Magicman

Those trees were probably set by a nursery before the 1968 HemisFair, so they could be anything fast growing.

PatD and I were there in 1968 when the fair opened.  It was quite an ordeal.
98 Wood-Mizer LT40 SuperHydraulic    WM Million BF Club

Two: First Place Wood-Mizer Personal Best Awards
The First: Wood-Mizer People's Choice Award

It's Weird being the same age as Old People

Never allow your Need to make money
To exceed your Desire to provide Quality Service

firefighter ontheside

I would say, in order, crepe myrtle, sycamore and bald cypress.  I don't see any cypress knees though.  
Woodmizer LT15
Kubota Grand L4200
Stihl 025, MS261 and MS362
2017 F350 Diesel 4WD
Kawasaki Mule 4010
1998 Dodge 3500 Flatbed

Magicman

If/when Cypress trees are on dry land and the roots are not flooded, they will very seldom grow knees. 
98 Wood-Mizer LT40 SuperHydraulic    WM Million BF Club

Two: First Place Wood-Mizer Personal Best Awards
The First: Wood-Mizer People's Choice Award

It's Weird being the same age as Old People

Never allow your Need to make money
To exceed your Desire to provide Quality Service

LeeB

'98 LT40HDD/Lombardini, Case 580L, Cat D4C, JD 3032 tractor, JD 5410 tractor, Husky 346, 372 and 562XP's. Stihl MS180 and MS361, 1998 and 2006 3/4 Ton 5.9 Cummins 4x4's, 1989 Dodge D100 w/ 318, and a 1966 Chevy C60 w/ dump bed.

Thank You Sponsors!