iDRY Vacuum Kilns

Sponsors:

STIHL WINTER BAR OIL ?

Started by CUT N RUN, December 05, 2020, 06:28:28 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

CUT N RUN

AM WONDERING WHAT TEMP. IS THIS OIL DESIGNED FOR ? ---BELOW FREEZING ?
I,VE ALWAYS USED THE ORANGE CONTAINER OIL - HAVE THEY CHANGED THE "BLEND" OF THE 
ORIGINAL OIL ? 

SwampDonkey

They are probably calling it 'all season', which is actually late spring, summer and early fall, not -20F oil. I don't buy winter grade because I'm not out wading snow cutting wood. I cut spring and fall.
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

CUT N RUN

Quote from: SwampDonkey on December 05, 2020, 06:37:01 AM
They are probably calling it 'all season', which is actually late spring, summer and early fall, not -20F oil. I don't buy winter grade because I'm not out wading snow cutting wood. I cut spring and fall.
they r literally calling it winter grade

lxskllr

Probably subjective. When the regular oil glops out with long snotty strings, it's time to switch to winter weight. It's used when the user gets annoyed.

kantuckid

My Southern States dealer sells an oil he likely gets from the independent regional hardware Co that calls on him, not SS truck. It's even cheaper than Walmart bar oil @ $8.75 gallon. My latest is orange jug,  labeled "summer weight" and says 30wt. It seems to work OK lately since winter kicked in. If it gets slow I'll dose it with a small amount of diesel fuel in the jug to loosen things up. I suppose you could also ad a bit of ATF as it's gonna be a light oil always and not expensive either. Small amount of single weight Dollar General cheapo thinner viscosity would work OK added into the bar oil. 
 
Kan=Kansas;tuck=Kentucky;kid=what I'm not

realzed

Yep  that's what I do year-round.. toss in some of the lightest TSC (cheap) oil that I can find with the Stihl stuff and it produces a thinned it out grade on a somewhat 50/50 mixture - I blend it depending on the temperatures, and it seems to retain much of the Stihl tackiness - yet adds some colour that I can spot, along with the good wear characteristics of the Stihl oil.  
After close to 40 cords of hard maple firewood bucked up using my original 2 RS chains - one actually did the majority of the work - (original 20" bar and sprocket as well) all that continue to be very usable and with lots of life left on all them, I'm figuring I've found a decent formula to go forward with..
The TSC stuff brings down the oil cost in total as well - so a sort of an all-around win/win deal!

sprucebunny

I use the Stihl bar oil in the blue container year round because my small Stihl saws seemed to have trouble with oiling. They have a siphon type thing rather than a pump. Since switching, I've had no instances of lack of oil.

They cost the same so it doesn't matter.
MS193, MS192 and an 026  Weeding and Thinning. Gilbert Champion sawmill

doc henderson

i used orange when that was all they carried, now I use silver in the summer. and switch to the blue winter stuff when I need a jacket.  I do not cut much if I need coveralls and a coat unless it is absolutely necessary.  I have had no problems, but it would take a while to figure out if one did great, and the other did more or less great.  to me it is not worth skimping.  i only use about 2 gallons a year.  
Timber king 2000, 277c track loader, PJ 32 foot gooseneck, 1976 F700 state dump truck, JD 850 tractor.  2007 Chevy 3500HD dually, home built log splitter 18 horse 28 gpm with 5 inch cylinder and 32 inch split range with conveyor powered by a 12 volt tarp motor

barbender

Dude, lose the all caps and text language, it makes us feel like you are YELLING at us!😊 I don't know what temp range, or weight, the Stihl oil is. I have always used whatever bar oil is cheapest, and cut the summer stuff with a bit of #1 diesel that I have in my off road tank in my pickup. I figure the off road is only around $2.25 gallon, maybe I find the thickest bar oil I can so I can cut it with more diesel😁
Too many irons in the fire

CUT N RUN

Quote from: barbender on December 05, 2020, 07:17:11 PM
Dude, lose the all caps and text language, it makes us feel like you are YELLING at us!😊 I don't know what temp range, or weight, the Stihl oil is. I have always used whatever bar oil is cheapest, and cut the summer stuff with a bit of #1 diesel that I have in my off road tank in my pickup. I figure the off road is only around $2.25 gallon, maybe I find the thickest bar oil I can so I can cut it with more diesel😁
YEA , ANd i Add some USED deep-fryer oil to my bar oil cuz i like the smell of french fries while cutting firewood....

kantuckid

Don't you love an oil thread? This ones in the tank for me. 
Kan=Kansas;tuck=Kentucky;kid=what I'm not

Thank You Sponsors!