iDRY Vacuum Kilns

Sponsors:

Kasco Sawmill "Saw II B" Drive belt length

Started by Boone, Yesterday at 02:02:28 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Boone

Yesterday at 02:02:28 PM
I have seen people asking what length belt to buy for the Kasco mill, i replaced mine today and I used a 89 inch B v-belt. I had to adjust the motor mount a little so the over center clutch felt right ( the motor mount is slotted very easy to adjust).
Print
Go Up Pages1
User actions

Thank You Sponsors!