iDRY Vacuum Kilns

Sponsors:

Winching heavy loads .......

Started by TexasTimbers, November 21, 2005, 07:00:32 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

TexasTimbers

Of course Logs fall into this category as well as sea containers. I was making another post earlier and wanted to find out what the proper nomenclature was for the locking mechanisms so I could include them in my post. Never did find an IPB for a sea container but I stumbled across this article which I thought might give someone pause next time they are winching a load which might be dangerous, or a light load which meets a bind.
If you are standing in the "line of fire" and the cable or rope breaks, you could meet your Maker earlier than you might think. The article calls it the "Danger Zone".

Safety Tips for Winching Heavy Loads
The oil is all in Texas, but the dipsticks are in D.C.

Minnesota_boy

I have a neighbor, a young man that we'll call One Eye Jack.  He was using the winch on his 4-wheeler and wasn't using proper safety techniques.  Now he has one eye.  Nuff said.
I eat a high-fiber diet.  Lots of sawdust!

sawguy21

I used to be involved with moving seacans and we never used a chain bridle. Absolutely no give. Wire rope only with a minimum of 5:1 safety factor.  We preferred to use a crane but did not always have one available.
Seems that  operator was not paying attention when the load hit the end of the deck and stopped. A protective barrier behind the controls might be an idea but I am not sure if it would be practical. This loading method is used all the time in the oil patch. I'll have a look at some bed tractors to see what protection is used
old age and treachery will always overcome youth and enthusiasm

Thank You Sponsors!