iDRY Vacuum Kilns

Sponsors:

Peterson 10" WPF milling, Saturday, August 2nd, Brighton, IL

Started by JimBuis, July 30, 2008, 02:40:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

JimBuis

July 30, 2008, 02:40:23 PM
If anyone in the St. Louis metro area would like to see a Peterson 10" WPF being run, you'd be welcome to come watch. The site is a couple of miles west of Brighton. If you want directions, email me, the address is in my profile. Warning, if you show up, you might have to carry a board or two. ;)

Right now, we are planning on milling some oak. None are too big, only about 20" DBH.

I've lately been too busy working to do any milling. :( I was pleasantly surprised that the mill fired right up a few minutes ago. ;D

Later,
Jim
Jim Buis                             Peterson 10" WPF swingmill

Firebass

#1
July 30, 2008, 10:54:50 PM
I'd come take a gander if you were not so far away.

Firebass

JimBuis

#2
July 30, 2008, 11:56:41 PM
Too far?  Just catch a flight into St. Louis. I can arrange for somebody to pick you up. ;D

Jim
Jim Buis                             Peterson 10" WPF swingmill
Print
Go Up Pages1
User actions

Thank You Sponsors!