iDRY Vacuum Kilns

Sponsors:

3120 chain oil

Started by Tree tech, July 23, 2009, 06:04:09 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Tree tech

Hi there, i have posted this before, i still cant get enough oil on my chain! It has an extra oil lever, correct bar and chain combo and drive, all oil paths and holes clear, oil pump is set to full , running a 42inch bar for logging, anyone else using one?

01crewcab

I don't have a good answer. I can only think the oiler is bad. Never ran a 3120, so I have zero knowledge on them.
2100(2),480, 281, 181,372XPW, 460,435,350,61(4),51-Huskys
49SP, 630Super(3),670's(4), 830, 920, 930 Jonsered's
S-XL925 Homelite
SP125C, 790, 250, 1010 Macs
27Ton Troybilt Splitter
NRA Life Endowment Member
Viet Nam Vet

sablatnic

It might be the tube behind the exhaust. I supply oil to the oiler from the tank. You can remove the exhaust to check. Or maybe the filter is clogged. You have to remove the filter to check that too. Could be one of these when the hand pump is bad too.

Thank You Sponsors!