iDRY Vacuum Kilns

Sponsors:

Time fer a whatsit

Started by pasbuild, August 31, 2009, 08:26:38 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

pasbuild

August 31, 2009, 08:26:38 PM
 






If it can't be nailed or glued then screw it

sprucebunny

#1
August 31, 2009, 08:37:50 PM
Beech ? with some quilting !
MS193, MS192 and an 026  Weeding and Thinning. Gilbert Champion sawmill

Reddog

#2
August 31, 2009, 08:58:04 PM
Yellow Birch

beenthere

#3
August 31, 2009, 10:11:04 PM
First board through the drum sander  :)
south central Wisconsin
It may be that my sole purpose in life is simply to serve as a warning to others

pasbuild

#4
August 31, 2009, 10:36:35 PM
nope

nope
and nope
that board hasn't seen the sander yet
If it can't be nailed or glued then screw it

Toolman

#5
August 31, 2009, 10:55:30 PM
Hickory?
"A government big enough to give you everything you want, is strong enough to take everything you have" (Thomas Jefferson)

Corley5

#6
August 31, 2009, 11:08:01 PM
Soft maple or red maple if you prefer  :)
Burnt Gunpowder is the Smell Of Freedom

Warbird

#7
September 01, 2009, 12:06:27 AM
Maple is my guess, too.  I am not good enough to tell you a specific type of maple.

DanG

#8
September 01, 2009, 12:13:40 AM
Not Yellow Birch, eh?  Khaki Birch perhaps?
"I don't feel like an old man.  I feel like a young man who has something wrong with him."  Dick Cavett
"Beat not thy sword into a plowshare, rather beat the sword of thine enemy into a plowshare."

Coon

#9
September 01, 2009, 12:34:59 AM
My guess is white birch even though I don't really think so.  The lighter colored wood appears to be a bit on the dark side.  usually has a very blonde color.

If you would give us a better picture of the bark maybe we could be a bit more educated with our guesses.  ;D   ;)
Norwood Lumbermate 2000 w/Kohler,
Husqvarna, Stihl and, Jonsereds Saws

pasbuild

#10
September 01, 2009, 08:19:36 AM
Sorry no pic of the bark only have two boards of this flavor in our last order.

If it can't be nailed or glued then screw it

WDH

#11
September 01, 2009, 09:54:35 AM
It sure isn't ERC like the piece that Cedarman stumped us on at the Pig Roast  :).

My first thought was persimmon because of the black knot.
Woodmizer LT40HDD35, John Deere 2155, Kubota M5-111, Kubota L2501, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

Dana

#12
September 01, 2009, 10:07:38 AM
Cherry
Grass-fed beef farmer, part time sawyer

LeeB

#13
September 01, 2009, 12:37:51 PM
My first guess was a board but I guess you fellers is gonna be more tcknikal than that.  :D
'98 LT40HDD/Lombardini, Case 580L, Cat D4C, JD 3032 tractor, JD 5410 tractor, Husky 346, 372 and 562XP's. Stihl MS180 and MS361, 1998 and 2006 3/4 Ton 5.9 Cummins 4x4's, 1989 Dodge D100 w/ 318, and a 1966 Chevy C60 w/ dump bed.

pasbuild

#14
September 01, 2009, 12:42:17 PM
That was probably to EZ for Corley5 but it is quite rare

If it can't be nailed or glued then screw it

Corley5

#15
September 01, 2009, 12:55:35 PM
 :)  So whatcha gonna do with it  ??? :)
Burnt Gunpowder is the Smell Of Freedom

pasbuild

#16
September 01, 2009, 01:06:40 PM
I already used one of them in the last Birdseye kitchen that we did, this one will end up in the next one I suppose.
If it can't be nailed or glued then screw it
Print
Go Up Pages1
User actions

Thank You Sponsors!