iDRY Vacuum Kilns

Sponsors:

magnetic stickon rules

Started by sdunston, February 21, 2010, 03:15:43 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

sdunston

February 21, 2010, 03:15:43 PM
I use the one that came with my LT28 all the time . Today I made one up for 2/4 I have a guy that wants about 500ft of 1/2x10 boards to panel the inside of a cabin. Hey what ever thet want :D. Does anyone else make there own and if so what sizes are common. I know I am talking @$%^&$#@ for you guys with a setworks ::)
Thanks Sam
WM LT28, American fordge 18x8 planer,Orange and white chainsaws, NH TC33, IHT6 dozer, IH-H tractor and alot of other stuff that keeps me agravated trying to keep running

Slabs

#1
February 21, 2010, 09:08:07 PM
I've made a couple of special rules for a LT40.  Used aluminum yardsticks from Lowes and made my own scales on the back with fine point felt-tips.  Put Krylon clear on the scale for protection.  I've made  one from wood sawed thin enough to fit into the scale holder.  The yardsticks didn't exactly "fit" the scale mount but a notch where the securing screw is for the removable scale took care of the problem.(yardstick is a bit wider than the miser scale but will slide in except for the placement of the holding screw, thus the notch)

Lotsa different dimensions are likely to be required and there's no reason that they couldn't be accomodated.

Good luck
Slabs  : Offloader, slab and sawdust Mexican, mill mechanic and electrician, general flunky.  Woodshop, metal woorking shop and electronics shop.
Print
Go Up Pages1
User actions

Thank You Sponsors!