iDRY Vacuum Kilns

Sponsors:

Wood Splitter with a Spring

Started by mometal77, September 18, 2014, 12:15:26 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

mometal77

September 18, 2014, 12:15:26 AM
Never seen anyone post this and I did a search... what I need to build before winter hits.  I bet it does not work good with knots.

https://www.youtube.com/watch?v=dGGH4XKNULU
Too many Assholes... not enough bullets..."I might have become a millionaire, but I chose to become a tramp!

beenthere

#1
September 18, 2014, 12:55:20 AM
Has been posted before, and looks like a good, cheap, simple way to hand process wood. What I split with a hydraulic splitter wouldn't happen with this rig, IMO.

Would have to be real easy splitting wood that isn't bucked very long. But beats swinging a splitting maul and re-setting blocks to split again.

Go for it.
south central Wisconsin
It may be that my sole purpose in life is simply to serve as a warning to others

mometal77

#2
September 18, 2014, 06:18:22 AM
I looked for it and I agree.  This would split my cedar,hemlock and alder but not my maple. I have been looking for another hydraulic cylinder for my wood splitter or just re seal the one I have.  Will check on craigs.
Too many Assholes... not enough bullets..."I might have become a millionaire, but I chose to become a tramp!

trooperTdiesel

#3
October 03, 2014, 12:32:02 AM
for a easy splitting wood, this would be nice...

( cl ads removed by administrator)
many Garrett 15s
have a 128 5'x10'x30' MD mill.
as well as worked at Mobile MFG CO in troutdale, OR for the last 1.5 years before doors closed.
you say David Wallace to Ron H, he will know me....lol
2 JD 440 loaders, B7100 tractor, 3 350 J\D dozers 
and many fords and isuzus
Print
Go Up Pages1
User actions

Thank You Sponsors!