iDRY Vacuum Kilns

Sponsors:

Still #1in my book

Started by Cypress Man, June 04, 2015, 10:38:41 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Cypress Man

June 04, 2015, 10:38:41 PM
I recently had trouble with the display on the Lt70 dcs not working properly. When going from manual mode to pattern mode the #3 function button would illuminate and any button you would press on the entire panel would only cycle through the #3 presets. I called WM in Indy and talked to Mike Ikenburger and he sent a SD card to download the program again. When that didn't work he sent a new control panel that has corrected the problem.  Even though my mill is over a year old and has over 600 hrs on it, the parts, shipping, and return shipping were sent free of charge. There's not any companies I  know of that would have done that with a $970.00 part. Thanks Woodmizer! It's my third new Wm mill and won't be my last .
LT70 wide head electric, IC5 Power conveyor, transfer table, Stop and Load Log Deck, Catapiller 360B Telehandler, Cat tl642c Teleloader, Cat TH514 Telehandler, Woodmizer EG400 edger, Logosol PH360 moulder, Extrema 26" Planner, Grizzly 16" dual conveyor resaw, Prentice 285 log loader

Peter Drouin

#1
June 05, 2015, 06:18:21 AM
 smiley_thumbsup
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

fishfighter

#2
June 05, 2015, 06:26:47 AM
Great. Now when can I come in visit you? I pass your place a few times a month and would love to buy a couple cypress logs from you.

Cypress Man

#3
June 05, 2015, 06:35:30 AM
Stop by any time Fishfighter. I'm open from 7am to 4pm Monday through  Friday. It's almost impossible to buy cypress loss now with all the rain we've been getting. Even the hardwood mills are struggling to get a few logs. I guess it's gonna dry up one day. :D
LT70 wide head electric, IC5 Power conveyor, transfer table, Stop and Load Log Deck, Catapiller 360B Telehandler, Cat tl642c Teleloader, Cat TH514 Telehandler, Woodmizer EG400 edger, Logosol PH360 moulder, Extrema 26" Planner, Grizzly 16" dual conveyor resaw, Prentice 285 log loader

AnthonyW

#4
June 05, 2015, 06:45:27 AM
I may have hesitated about spending the money to buy a sawmill, but I didn't hesitate to buy a Woodmizer.
'97 Wood-Mizer LT25 All Manual with 15HP Kohler

fishfighter

#5
June 05, 2015, 06:53:46 AM
Sure enough about the rain. I can't even get back in the woods on my place due to way to much water and mud. I might ride up your way later today.
Print
Go Up Pages1
User actions

Thank You Sponsors!