iDRY Vacuum Kilns

Sponsors:

I think she's on the blink.. or is it just me?

Started by Danny_S, April 25, 2004, 06:34:55 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Danny_S

On my end the pages wont refresh right, the topics wont go to the top when submitted...ect... I dunno.. anyone else?
Plasma cutting at Craig Manufacturing

Tobacco Plug

How's everybody doing out in cyberspace?

Fla._Deadheader

All truth passes through three stages:
   First, it is ridiculed;
   Second, it is violently opposed; and
   Third, it is accepted as self-evident.

-- Arthur Schopenhauer (1788-1860)

Rocky_J

I will assume you are running Windows/ IE since 95% of us use it. On your top toolbar click Tools> Internet Options. In the window that comes up, you should be on the 'General' page. Halfway down you will see 'Temp. Internet Files' with three buttons. Click 'Settings' and then choose 'every visit to the page'.
If it is set on 'never', you will not get a current page unless you keep hitting the 'refresh' button.

Frickman

The 'puter had a glitch in the server tonight. Jeff got 'er fixed! 8) 8)
If you're not broke down once in a while, you're not working hard enough

I'm not a hillbilly. I'm an "Appalachian American"

Retired  Conventional hand-felling logging operation with cable skidder and forwarder, Frick 01 handset sawmill

Pretend farmer when I have the time

Danny_S

It seems to be fine now... must have been that 600ml bottle of 4.8% Pickaroon's.  ;D
Plasma cutting at Craig Manufacturing

Jeff

It was probably the server. I had to reboot it, and then the server time and date was off so had to get into the command line and reset that.
Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Frickman

I'm glad you know how to reboot it properly Jeff. I would only know how to reboot it out the door.
If you're not broke down once in a while, you're not working hard enough

I'm not a hillbilly. I'm an "Appalachian American"

Retired  Conventional hand-felling logging operation with cable skidder and forwarder, Frick 01 handset sawmill

Pretend farmer when I have the time

Jeff

Just call me the midget doctor.
Forestry Forum Founder and Chief Cook and Bottle Washer.

Commercial circle sawmill sawyer in a past life for 25yrs.
Ezekiel 22:30

Danny_S

I felt like booting my server this morning at the local choke & puke, she came back twice to check my order of bacon and cackleberries and she still scrambled them 'stead of over easy...... >:(
Plasma cutting at Craig Manufacturing

Duane_Moore

 :Dwell ya should of put some.  Rust Reaper on it.  Duh---Duane
village Idiot---   the cat fixers----  I am not a complete Idiot. some parts missing.

SwampDonkey

Can't get nuttin done right now Danny. I wanted some brochures printed up for the trade show and some reason they think photocopy is the same as printing. Next time its on the deskjet at home. :D
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

Tom

Hmmmmm

I can't find anything to complain about. :-/

SwampDonkey

Tom:

As far as complaining about the server, I have no complaints either. It's a freebie to come here. :D

But when ya pays for sumthin, DanG better be right the first time. ;)

cheers
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

Tom

yep........  I'm just having a good day. ;D

Kevin


Tom

It's kinda neat to smell roses when my nose works.   ;D

Usually when my sniffer turns on, somebody is making Sour Krout. :D

Yep, Its been a beautiful day in N. Fl.  I got me some coffee and pulled up a chair next to the sawmill so I'd be there just in case anything needed to be done.  Haven't seen a soul all day. ;D :D

SwampDonkey

Tom:

Ain't life grand? Poplars are in full bloom, 'pinky and blue boy' flowers are blooming in some of my flower beds, irises, tulips,dafodils and lillies are up too. Box edler buds are swelling, about to bloom also. I was out today after it rained this morning and had cleared off. I was listening to the song birds and sitten in the warm spring sun. Now its raining again hahahaha :D :D :D. I don't have ambition enough to crawl through softwood thickets in the wet :D :D. I'm trying to get a 40 acre chunk of softwood thinning ready for monday marnin (with ribbons and GPS). :)
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

Danny_S

Hey Swamp, You needin help with that gps'n and taping? I can run a chainsaw and actually can bring me own. I even have the 3120xp for those bigger tasks  :D  I am moving to woodstock very soon and will be looking for work.
Plasma cutting at Craig Manufacturing

SwampDonkey

Danny:

This thining I'm marking is for in between jobs. I'll be doing layout for a number of contractors this season (hoping). I never know actactly how much or when untill I see the whites of their eyes ;). Mix human nature  with uncertainty and you never get anything definate, unfortunately. I don't have any plans this season for hiring anyone unless I get a large overwhelming volume of work. Maybe we'll cross paths sometime in Woodstock. ;)

cheers
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

OneWithWood

I'm with Tom.  Life has been quite good of late.  I start the morning out with an early morning drive in the dump truck to a nearby quarry to pick up a load of limestone scrap.  I am using the scrap to 'pave' my forest road to prevent erosion and that bowling alley effect.  Get to watch the world waking up and the trees leaf out.  I arrive back at the house, grab a quick shower and head back into town for the main gig.  I take care of whatever during the day and head back home to spread the stne and mill aspen until dark.  I start the day with a smile and I end the day with a smile.  Life is good!
One With Wood
LT40HDG25, Woodmizer DH4000 Kiln

Norm

My favorite time of the day is just before sunrise, I haven't had an alarm clock go off in ages. Not sure how that ever came to be but glad it has. I sit in my office at home read the FF, drink the morning cup of coffee and watch the world wake up. I overlook our pond so plenty of wildlife and beautiful sunrises are common. Spring is really coming on here and everything is starting to rise. Yep Tom, OWW life is good thanks for reminding me.

Danny_S

Well, if ya see a 25' trialer with a big ole husky hangin off of it you will know it's me  :D
Plasma cutting at Craig Manufacturing

SwampDonkey

 :D :D :D  Danny  :D :D :D

Did the wife's folks run ya outta Harvey? ? ;D :D :D
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

Danny_S

 :D  naa, I am the one from Harvey. She is from Perth. She is happy here but work is taking her up there, to the Hospital. I am just taggin along. ;)  I am working full time here but I cant quit till I find something up that way..
Plasma cutting at Craig Manufacturing

Thank You Sponsors!