Mast Wiper

[learner]

I use an old dish sponge and pair of gloves.  Just soak the sponge in ATF and wipe down the mast a couple times a day.  You can drop it all in a can and cover to keep the dust out.  Wipe the masts down with a paper towel first and then lube em up.

[Magicman]

I am just gonna keep on squirting.  That is what the WM tech does, and that is good enough for me.   ;D

[tjhammer]

Seriously has anyone tried paste wax,the type you would use on a wood floor,its a good high pressure lube and will dry and not attract as much dust&dirt. Frank C.

frank I have a swing mill I use car spray wax to keep the up down free of dust with oil my mill gets where it will not go up or down so once a week I spray on the wax wipe it down then in the mornings just a quick wipe down and saw all day ever so often I clean then with soap&water for me better than oil   tj

[POSTON WIDEHEAD]

Seriously has anyone tried paste wax,the type you would use on a wood floor,its a good high pressure lube and will dry and not attract as much dust&dirt. Frank C.

frank I have a swing mill I use car spray wax to keep the up down free of dust with oil my mill gets where it will not go up or down so once a week I spray on the wax wipe it down then in the mornings just a quick wipe down and saw all day ever so often I clean then with soap&water for me better than oil   tj

Hammer, what would charge me to "detail" my LT40. Wax my mast and "ARMORALL" the tires?
Any loose change you find in the tray you can have.  :D :D :D
(I'm just poking at ya.....don't holler at me now. ;D)

[learner]

Spray wax hmm?  Hey, i'll try anything once!  Twice if i like it! :D