iDRY Vacuum Kilns

Sponsors:

Reaction Chamber Brick

Started by stratford 50, August 28, 2013, 11:48:32 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

stratford 50

August 28, 2013, 11:48:32 AM
What do you use to hold the fire brick in place inside the reaction chamber? I have used a 2000 degree mortar in a tube that needs to be redone each season, looking for suggestions.

JJ

#1
September 06, 2013, 03:48:48 PM
I don't use anything other than gravity.

         JJ

doctorb

#2
September 06, 2013, 05:22:20 PM
Some of mine have broken and have been discarded, others are loose and can tip over during cleaning.  I use nothing to hold them in place.
My father once said, "This is my son who wanted to grow up and become a doctor.  So far, he's only become a doctor."

stumper

#3
September 07, 2013, 01:05:03 PM
Some of mine have also broken over time.  Fortunately, I have spares from removing the fire brick from the inside.

Just gravity for me.  Be sure to clean the chamber fully.  Floor and wall.  Any space under a brick or behind a brick fills with fly ash, build up and eventually topple the brick. or bricks.

Logging logginglogging

#4
October 23, 2013, 02:13:58 PM
All mine has stayed in place quite nicely and hasn't broken up on me....
Print
Go Up Pages1
User actions

Thank You Sponsors!