iDRY Vacuum Kilns

Sponsors:

A couple headboard questions?

Started by justallan1, January 30, 2014, 02:55:12 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

justallan1

Well, I finally got the time to work on the foot board yesterday and am pretty happy that it was a lot easier to do that the first.
I used a plank that is narrower than the headboard and will have another set of planks to make another the same or will grab the wider one for this footboard.
I did get a chance to saw a couple small logs for legs and am figuring making them 2-1/2' for the foot board and 3-1/2' for the headboard, does that sound about right.
Allan


 

justallan1

I'm slowly getting the parts made for this thing.
Today I got two sets of legs sawn so if I ever decide to make another I'll have all the parts already.
I had to do some trading with a co-worker for some old ugly logs to get what I wanted and he got a couple of my wider slabs and all of the thin pieces shown here. I like how these look and know he'll have enough to keep himself busy for a good while, so everyone is happy.
Allan


 

hardtailjohn

That's some pretty wood Allan!!!
I'm so far behind, I think I'm ahead!

Magicman

You are making some wonderful decisions on your project.  It will be a treasure.   :)
Knothole Sawmill, LLC     '98 Wood-Mizer LT40SuperHydraulic   WM Million BF Club Member   WM Pro Sawyer Network

It's Weird being the Same Age as Old People

Never allow your "need" to make money to exceed your "desire" to provide quality service.....The Magicman

Thank You Sponsors!