New Cant Hook Grip

[samandothers]

Grouch, You will enjoy your Logrite!  Just ordered one!?!

[maple flats]

Like Magicman says, Logrites really like being with family, I have 4 and they always get along together well.

[WV Sawmiller]

   At the big Lewsisburg WV fairgrounds flea market yesterday I had 2 different sawyers say they needed to buy new cant hook handles from the local handles dealers there. I told them both to save the time and money and call Logrite and talk to Tammy. We wrote down the company and Tammy's name down so they'd remember. Hopefully they heed the advice.

   I am not far from having to replace the grips on my Logrite too. It is very sturdy but with enough abuse you can tear one up. You can even bend one if you cut a big enough tree on top of it. :D (Still works fine though.)

[Brad_bb]

  I got my new grip installed using MM's Technique. I covered the front hole and one of the pinholes with packing tape. Got the rubber grip started on the end and held it with my hand.   Then I choked up behind it and I had my buddy Johnny pulse air into the remaining pinhole.  I found that pulsing a little bit at a time, and stopping so my hand could rest worked the best. I got behind the grip with my leg so it wouldn't shoot off. That happened to me once when I started. But we worked it on in about a half inch to an inch at a time by pulsing the air.  Before I did this I had the cut that I did with the circular saw weld it up in the chainsaw Nick weld it up.



 

 

[Tam-i-am]

This is how we do it at logrite.

Tool inserted into cup, a squirt of isopropyl alcohol in the grip and one on the handle then line up the warm grip.


 Using the foot pedal to turn on the air, the grip fills and is pulled down in one quick motion.


 And that's how it's done.