Blades

[wall nut]

I have been reading this forum for the last 8 months or so.  I am glad to get as much information about sawing as possible.  You guys answer so many things in just your general conversations that most of the time a person just has to read.  One thing that I would like to mention is I have about 40 new 1 1/4 .042 woodmizer blades that I no longer need.  I purchased them for my own use when I was teaching and am now retired and no longer have access to the mill  If there is any interest in the blades  I would like $15 each plus shipping.  Keep up the good talk with all of the positive sawing information.  We can always learn more from others.  Also I now own my own mill, a Norwood LM2000 which keeps me busy.
Otto

[Jeff]

Welcome Otto.

Otto approached me about placing an ad, which I said I would allow, but I'm going to leave the thread right here. I dont imagine the blades will last long. If I had the bucks, I'd buy em.

[Radar67]

Welcome to the board Otto.

What are the length of the blades?

[wall nut]

They are the standard Lt40 blades
OB

[Tom]

That'd be 158 inches or 13'2"

[Kirk_Allen]

Where are you located? 

I just bought new blades from WM and there 15% off with no shipping if purchased at a show.  That brings them down to $16.00 blade delievered. 

[dail_h]

   I'd buy em,but they'ed probably be a little loose on my Norwood huh? :(

[sawwood]

Dail_H have them blades cut down to fit the Norwood. I got some
blades from Harold and that is what i did. Cost $6.00 a blade to
have them shorten.

Sawwood

[wall nut]

They are a little loose on the Norwood.
Otto

[Frank_Pender]

DanG it, I need 167" for my Oscar 36, or I would buy them all.  I just purchased 5 new blades for Oscar. :

[stumpy]

Will they fit on an LT30? Will you sell 10 of them?

[kderby]

Goodness, I would have thought this was a pretty straightforward event...marketing a unit of blades. 

Mr. Wallnut, where are you?  I am in Oregon and shipping cost is part of the equation.

Thank you,

Inthesticks

[wall nut]

I am in Johnstown,Ny.  They are in the orignal box and I will double box.
Otto

[wall nut]

I will sell 10 of them if that is what you need.  I will also split the cost of the shipping with anybody interested.
Otto

[stumpy]

Will they fit a Woodmizer LT30?

[Frank_Pender]

KDerby,  where are you in Oregon?

[stumpy]

I'll take 15  if they fit a WM LT30.

[WeeksvilleWoodWorx]

Will they fit a Woodmizer LT30?

According to Wood-Mizer's site all LT15-40 use a 158" blade.

Brian

[wall nut]

I will sell any number you need.
Otto