2050 parts interchangeability? and side note

[David B]

Looking for (another) parts saw for my (other) 2050. 2045s are similar, right? I need the flywheel, brake, and main housing. So pretty much exterior parts. Anyone know what else i can use for a parts saw? the 2100 series totally different?

On a side note...how many of us use "both" forums? And am i likely to irritate folks posting on both? I just like lots of input  ;D

[SawTroll]

The 2050 shares its user manual and the IPL with the 2045 and 2041, so those are the ones to look for, both for exterior and most other parts.
The 2150 is a much newer design, basically the same as Husky 350, and quite different from the 2050.

[Chris J]

Re posting on both sites...doesn't bother me, but I also post on 3 chainsaw forums.  The more input you receive the more info you have to work with.

Aw ra best!  Chris J.  8)

[Furby]

There are other forums ???
Never would have guessed! ;)

[David B]

There are other forums ???
Never would have guessed! ;)

Good point...

[SawTroll]

I have no problem with people posting the same (questions) on more than one forum.

I have done so myself.

[David B]

Thanks...I've run into trouble doing it on offroading forums.

[Chris J]

I should've added...and the greater the chances that you'll be able to help somone out.  Aw ra best! Chris J.

[SawTroll]

Thanks...I've run into trouble doing it on offroading forums.

I think you will avoid trouble if you avoid links or direct references between competing forums.
Not surpricingly, it also seem to me that some forum admins tolerate more of this than others.....