iDRY Vacuum Kilns

Sponsors:

Annuder whatzit

Started by Jeff, March 04, 2006, 03:01:13 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 3 All
User actions

UNCLEBUCK

#50
March 06, 2006, 11:09:24 PM
 That was fun can we have another ?  ;D  I had it scaled out to big like the size of a bow and arrow reel and here it was just a tiny u-joint cap  >:(
UNCLEBUCK    bridge burner/bridge mender

Coon

#51
March 07, 2006, 10:46:33 AM
Finally got a chance to read the post through and see what everyone guessed.  Had a vision that it was probably was a u-joint cap and was gonna guess that but sawhead beat me to the punch.  Guess I shoulda looked at the post earlier. ;D
Brad.
Norwood Lumbermate 2000 w/Kohler,
Husqvarna, Stihl and, Jonsereds Saws

Murf

#52
March 07, 2006, 11:02:32 AM
I think I got a mate to that cap Boss, several actually.  ::)

I had a sort of bump, thud when I eased on or off the gitty-up-go pedal in the dually. I suspected the grease zerk-less driveshaft to be the culprit. Ok, actually I was praying it wasn't the rear end.  ;)

The last U-joint at the rearend was so bad that two of the ends of the cross were worn down to an oval about half as thick as they shoulda' been.  :o

Coupla' hunrid clams later it's back to smooth.  ;D

Course while he was back there he pointed out that it's time fer 4 new skins on da back.... it's always sumat!  ::)
If you're going to break a law..... make sure it's Murphy's Law.

SwampDonkey

#53
March 07, 2006, 07:47:17 PM
Everytime I'm in the garage, it's a minimum of $700 bucks.  ::)
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))
Print
Go Up Pages 1 2 3 All
User actions

Thank You Sponsors!