iDRY Vacuum Kilns

Sponsors:

Mapp for Swing Blades

Started by Fla._Deadheader, April 12, 2006, 08:11:12 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Fla._Deadheader

April 12, 2006, 08:11:12 PM

Is it hot enough to replace tips or do I need oxy-acetylene ???
All truth passes through three stages:
   First, it is ridiculed;
   Second, it is violently opposed; and
   Third, it is accepted as self-evident.

-- Arthur Schopenhauer (1788-1860)

twoodward15

#1
April 12, 2006, 08:25:21 PM
I obviously don't run a swing mill, but I can't see why it wouldn't be hot enough assuming you have the right mix.
108 ARW   NKAWTG...N      Jersey Thunder

Captain

#2
April 12, 2006, 08:59:23 PM
All you need to do is melt silver.... :)

swinger

#3
April 12, 2006, 09:11:58 PM
  mapp gas works fine just takes a little longer.
                                                 

Fla._Deadheader

#4
April 12, 2006, 09:26:04 PM

Thanks, Y'all  8) :D :D
All truth passes through three stages:
   First, it is ridiculed;
   Second, it is violently opposed; and
   Third, it is accepted as self-evident.

-- Arthur Schopenhauer (1788-1860)
Print
Go Up Pages1
User actions

Thank You Sponsors!