Stihl 025 gas line replacement help needed.

[Steven A.]

I need to replace the line from tank to carb. I have the new molded line.
Can anyone tell me how much and what I will have to take apart to install this new line?

Thanks!

[joe_indi]

1.Remove the pickup body(Fuel filter)
2. Remove the air filter mount.
3. Pull out the upper end of the fuel hose from the carb.
4.Look under the handle there should be two screws holding the red plastic and black plastic of the handlebar together remove them.
3. On the right side rear of the handle bar there are two black cups prise them off and remove the crews inside.
4.There is one screw between the upper cup and the lower one, remove it also.
5.Now lift the rear  handle it should come up freely giving you ample room to proceed further.
Pull out the old hose or push it into the tank and take it out.
Grease the grommet on the new hose and push it into the tank from the top.
Make sure the grommet seats properly.
Reverse steps 5 - 1

[Kevin]

Hello Joe and welcome to the Forestry Forum.
I recognize you from the Woodticks, thanks for your input.